I need to add smtp and pptp to an existing pix setup on a 515e. Since the person who set it up put an implicit deny at the end that means I have to delete old access-list and create a new one. My q...
http://www.experts-exchange.com/Networking/Misc/Q_21156934.html
I have a webserver in a DMZ. I can access the webserver from the internet and I can access the server from inside the protected network.
Here is a diagram...
INTERNET---ROUTER (ISP's)-------...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21786403.html
What is the proper way to allow icmp messages from my network through a Cisco Pix 515e, without allowing it from the outside in. I have looked at http://www.experts-exchange.com/Security/Firewall...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21805859.html
HI I have upgraded our PIX to 722. Since i have done this everything with the firewall functionality is fine but i am not able to log into the PDM anymore. I beleive i am supposed to upgrade this a...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_22149999.html
Part 1
How do I reset a Cisco 515E PIX to factory default?
How do I reset a Cisco Switch to factory default?
Part 2
I have a cable modem attached to a 515E PIX. I configured E0 for DHCP on th...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23103051.html
This what I want to do,
67.x.x.1 to 67.x.x.255
So I have public Ip addresses I would like to add a (Eth 3) so I can control all of the outside
ip addresses going out from the pix vs. having a...
http://www.experts-exchange.com/Security/Misc/Q_23070278.html
I am having trouble configuring my firewalls for failover. I have two identical Cisco PIX 515E firewalls connected by a failover cable. They are both connected to a Cisco switch via Cat5. I have tr...
http://www.experts-exchange.com/Networking/Misc/Q_20716348.html
First of all I've a silly question on PIX 515E. Since this is the first time I'm working with PIX
#1. We have a DSL line and I need to configure 20 clients to access internet and making one machin...
http://www.experts-exchange.com/Security/Misc/Q_20842945.html
We have an internal network with around 25 pc's and mac's all accessing the net through the pix 515e firewall. Is there any command I can use to track bandwith usage for each ip address in the offi...
http://www.experts-exchange.com/Networking/Misc/Q_20875477.html
I have a pix 515E and i am trying to allow my inside hosts access to my dmz hosts. However i am not having a lot luck in this process. I also am hanging a Vpn Hardware client off of the DMZ that wi...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_20934705.html
