I am testing a PIX 520 firewall in an environment like:
outside 192.168.0.0
inside 10.0.0.0
The configuration is as below:
PIX Version 5.0(0)212
nameif ethernet0 outside security0
nameif eth...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_20538524.html
We have begun a network migration, which includes placing a new network in an AS400 iSeries environment. We have created an Exchange 2003 server on one of the blades and communicates through a PIX ...
http://www.experts-exchange.com/Networking/Misc/Q_21363466.html
I have installed a pix firewall. I setup NAT and backed it up with PAT. There are about 300 machines across three networks that are connected to the PIX. Not all the machines can get to the inte...
http://www.experts-exchange.com/Networking/Misc/Q_21429971.html
I need to set up a test environment for a new site-to-site VPN solution that I would like to implement in the next month or so.
Here is a description of my environment:
I have 1 office that h...
http://www.experts-exchange.com/Networking/Misc/Q_21691208.html
hi
can i use PIX firewall 525 to block P2P application and yahoo messanger or not and how i can do that if its possible
thanks
http://www.experts-exchange.com/Microsoft/Windows_Security/Q_22678820.html
I am designing a new network and need to purchase new firewalls. Since Cisco is sending the Pix's to end of life i'm not sure where to go. I'm not really interested in the ASA's. Does anyone hav...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I am unable to connect to my exchange server via the outside mail address (mail.city.com). I can connect inside the domain via the server name (mail1.city.pri) I have a barracuda spam device instal...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Does anyone know how to save the password to a 515E PIX? I type enable, enter password to then I am in privilage mode. I then use passwd to change password. I go to save it: write mem or write t...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
In my Pix 515e there is an access-list entry :
Pix1(config)#access-list out_acl permit tcp any host 69.67.67.100 eq smtp
( 69.67.67.100) is the public IP address of the Mail server.
do I ne...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_23286563.html
I have setup the ASA 5501 to form a VPN Tunnel to the HQ but couldn't success. Below is the error shown by debug
ABCHongKong# Sep 11 18:06:05 [IKEv1]: Group = 233.334.122.162, IP = 233.334.122....
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
