I just acquired a Dell 1400SC, and in checking it out, I noticed a switch that is hanging loose in the case. It is soldered to the motherboard in the same row as where the system board jumpers go,...
http://www.experts-exchange.com/Hardware/Misc/Q_21936216.html
Zones:
HardwareDate Answered: 07/29/2006 Rating: 9.2 Views: 0
I have a Dell PowerEdge 1400SC server that I want to be able to wake remotely. I have successfully turned it on via the magic packet, but I cannot get it to work consistantly. Sometimes it just w...
http://www.experts-exchange.com/Networking/Misc/Q_21599599.html
Zones:
NetworkingDate Answered: 11/28/2005 Rating: 8.2 Views: 0
I have an older server (Dell PowerEdge1400SC) that we used for a remote terminal. It has three Fujitsu 18GB drives with a Raid 5 configuration. One of them has failed. I have two questions about...
http://www.experts-exchange.com/Storage/Hard_Drives/Q_23450466.html
I got a call about a client who has a Dell Poweredge 1400sc which booted up ok but has a contstant beep. It gives off a single beep every 2 seconds. There is no Dell openmanager software on this ...
http://www.experts-exchange.com/Hardware/Servers/Q_24402830.html
Zones:
ServersDate Answered: 05/12/2009 Rating: 9.0 Views: 63
Ok experts,
I have a Dell PowerEdge 1400sc server that is running out of space. It currently has four 18.2GB 10K RPM SCSI Hard Drives. I am planning on replacing them with four 36.4GB 10K RPM SCSI...
http://www.experts-exchange.com/Hardware/Desktops/Q_21796929.html
Yes I know the Dell PowerEdge is a Server but I couldn't find the Server section so I thought I'd put it in "Desktops" as it's a PC at heart.
n.b. Dell produced at least two types of machine wit...
http://www.experts-exchange.com/Hardware/Desktops/Q_21854793.html
I'm trying to install a new drive to replace the one in my 3 drive Raid 5 configuration. The older drives are only like 18 GB or something, but Dell told me that I could use a bigger drive, but th...
http://www.experts-exchange.com/Storage/Storage_Technology/Q_23454089.html
