I provide users access to the internet via my linux server (rhel4). I have putty set up to tunnel to the server for each of my users. We use firefox to send all requests over this tunnel. Howeve...
http://www.experts-exchange.com/Security/Operating_Systems_Security/Linux/Q_21729473.html
We are looking for a well supported SATA II (3 Gbps) controller, the
one that is supported under stock kernel distributed under RHEL4.
Building/Installing driver modules is not an option. We do...
http://www.experts-exchange.com/OS/Linux/Setup/Q_21842929.html
Zones:
Linux SetupDate Answered: 10/31/2006 Grade: B Views: 0
I have insgtalled RHEL4 and I can ping out can search by name but cannot get into the server through ssh I get network error no host route /etc/hosts looks good and netstat -rn i get a retunr for t...
http://www.experts-exchange.com/OS/Linux/Q_21397899.html
Zones:
LinuxDate Answered: 04/21/2005 Grade: A Views: 0
Got a new box running RHEL4 EMT64 and Sendmail 8.13.
Noticed that there is no longer a vacation rpm package. The most recent vacation rpm I could find was from several years ago. Is this alri...
http://www.experts-exchange.com/OS/Linux/Q_22455318.html
I am new to RHEL4. i installed vncserver. And on the client end i used vncviewer.
The problem is as i connet to the client say with this command
192.168.100.1:1
It got connected. Now when i logo...
http://www.experts-exchange.com/OS/Linux/Q_22637989.html
I'm trying to build the binary package of fontconfig-2.2.3-7, so that I can get gtk working, which will allow pango, then seamonkey, then (finally) fence! (I love package dependencies)...
I've d...
http://www.experts-exchange.com/OS/Linux/Distributions/Red_Hat/Q_22650933.html
I have configured a kickstart server but when I kickstart a client with multiple interfaces it prompts to choose the interface through which to perform installation. Why is this not also automated?
http://www.experts-exchange.com/OS/Linux/Administration/Q_23023503.html
rsync is a popular way of sync'ing two directories on same or different file systems but it builds the whole table of files to be copied in memory. This consumes quite a bit of memory for a large f...
http://www.experts-exchange.com/OS/Linux/Q_23268712.html
I have inherited a preinstalled/configurred RHEL4 linux box with two soft RAID0 md0 and md1 with 3x400GB SATA drives in each. md1 keeps a snapshot of md0 with rsync done every night. This has been ...
http://www.experts-exchange.com/OS/Linux/Q_23356141.html
"ps auxw" lists too many fields and in an order I do not need/like.
So, I use "ps -ewo user,pid,nice,pcpu,pmem,time,start,cmd"
which works fine except that start time is in an impractical format ...
http://www.experts-exchange.com/OS/Linux/Administration/Q_23505877.html
