I have just set up Linux with what seems to be all the necessary items ie(route, hosts.conf, etc.) My problem though is that although I can ping myself using loopback, I cannot see anyone on the ne...
http://www.experts-exchange.com/Networking/Linux_Networking/Q_10010010.html
Zones:
Linux NetDate Answered: 05/07/1997 Grade: C Views: 0
I need to write a shell script similar to the following:
netstat -rn | awk '{if ($3 = "UGHD") print | route delete $1, $2}'
I can't seem to get the command route delete to accept the output from a...
http://www.experts-exchange.com/Programming/System/Unix_-_Posix/Q_10112389.html
Hi,
A have a Windows NT acting as firewall (running Checkpoint firewall 1 using NAT) with 3 nics on it. One goes to my internal network and the others are connected to 2 different Internet connecti...
http://www.experts-exchange.com/Networking/Windows_Networking/NT/Q_10165936.html
In win98, both ipconfig /all and winipcfg show IP routing disabled - is it possible to enable it?
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/98/Q_10208785.html
Zones:
Windows 98Date Answered: 10/30/1999 Grade: C Views: 0
When I invoke the following command:
ROUTE ADD 192.168.10.0 MASK 255.255.255.0 192.168.100.1
the route will be added to the routing table.
How can I do it automatically at every startup of NT Se...
http://www.experts-exchange.com/Networking/Windows_Networking/NT/Q_10223653.html
I have a batch file that sets up my routing table (using the ROUTE command) upon boot. Over time, it seems to change, I suspect as the result of ICMP_REDIRECT messages isued by local routers. How...
http://www.experts-exchange.com/Networking/Windows_Networking/NT/Q_10492018.html
how do you choose which interface to route to based on PORT no.
eg. if this packet is to destination port 21, then it will be routed to 172.16.216.1
if this is to destination port 80, then th...
http://www.experts-exchange.com/Networking/Misc/Q_10805001.html
Zones:
NetworkingDate Answered: 09/09/2000 Grade: B Views: 0
My router Cisco 2511 is used for Dilal-up ,
but after changing modems and , get new IP network class 'C'
dial-up don't work.
Debug info for modems show following :
1.modem is up
2.line auth...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20219355.html
Zones:
RoutersDate Answered: 02/02/2003 Grade: A Views: 0
Not sure what I missed here but,
I have an ISDN router with DNS at 192.168.2.1
A Cisco 1602 at 192.168.2.2 (A network)
A Livingston at 192.168.1.1 (B network)
Cisco and Livinston joined by a ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20243086.html
Zones:
RoutersDate Answered: 12/11/2001 Grade: A Views: 0
What are the potentials for defining an application for delivery route mapping system using Microsoft Mappoint 2000.
Can we mould the way maps appears in Mappoint?
Is there any third party app...
http://www.experts-exchange.com/Database/GIS_and_GPS/Q_20308858.html
