Enter Keywords:
1 - 10 of 56(0.001 seconds)
Sort By:
 
I have a generic unbranded server running novell 3.12 - (I didnt install this server - I only admin it). The ONLY hard disk in the machine is an IBM DCAS-32160 (2.1GB). I want to replace this...
Zones: HardwareDate Answered: 01/08/2004 Rating: 5.2 Views: 0
Hi there, we currently have a dell server with and embedded PERC 5/i card. This card has on it 2 connectors. we have discovered that our disk arrays are setup as follows: connector 1: R...
Zones: Hard Drives, Dr...Date Answered: 03/27/2009 Rating: 9.3 Views: 0
I just unplug two SCSI (I or II ?) hard disk (980 Mb) from an old IBM AS/400 machine, I tried to connect it with my Adaptec 2940UW SCSI controller and boot up the linux. Both controller BIOS and Li...
Zones: Linux, Linux DistributionsDate Answered: 10/18/1997 Rating: 6.6 Views: 0
I have got to set up windows cluster server with a raid5 shared disk system so I thought I would practice first with the spare h/w i have lying around the office. I am trying to simulate our pro...
Zones: HardwareDate Answered: 10/10/2003 Rating: 6.0 Views: 0
I built a P-4 2.2 GHZ computer. Installed W2K. Installed the SCSI card and drives from the old computer. Now W2K says "Hard disk D: not formatted. Want to format it now?" There was nothing wrong wi...
Zones: Drives / StorageDate Answered: 05/05/2004 Rating: 5.4 Views: 0
Using LSI Logic 21320RB Ultra320 Dual Channel controller, I went into the card bios and set the card to mirror two identical Fujitsu drives.  The onboard scsi controller has a single drive attached...
Zones: Drives / StorageDate Answered: 06/25/2006 Rating: 8.2 Views: 0
This is one of those things that we've never had to do before, and we've now got 2 or 3 clients who need it. So, here goes - we need to learn a new trick! I'm hoping someone can guide us through in...
Zones: Servers, SBS Sma...Date Answered: 08/17/2007 Rating: 7.4 Views: 0
First, here is the configuration: -Asus P2B-DS w/ built-in Adaptec ultra2 SCSI(AIC-7890), Intel 440BX -9.1 Quantum VikingII U2W SCSI 7200RPM The setup can't find any mass storage to copy NT files o...
Zones: Win NT SetupDate Answered: 08/11/1998 Rating: 5.0 Views: 0
I just got an Iomega zip100 from a friend and am trying to install it.  It is not SCSI, but parallel.  I downloaded software from www.iomega.com and everything seemed to install just fine.  The com...
Zones: HardwareDate Answered: 05/21/2001 Rating: 9.0 Views: 0
They don't make the Barracuda 18 GB, 10,000 RPM SCSI drive anymore, but I have a server with an array of 5 of these drives. Will I have any problem replacing a failed drive with a larger (say 36...
Zones: Hardware, S...Date Answered: 09/28/2004 Rating: 7.8 Views: 0