i have a problem occured for over a week now but still i can't find the solution. the secondary SCSI drive of our server cannot be detected by the system. the system shows the following messages up...
http://www.experts-exchange.com/Hardware/Misc/Q_20233371.html
Zones:
HardwareDate Answered: 12/13/2001 Grade: A Views: 0
Hi
we opperate a Dell 6450 poweredge running SBS 2003. it is a little old, but does eveything we need. we require to upgrade our storage capacity. My question is can anyone tell me if this parti...
http://www.experts-exchange.com/Storage/Misc/Q_21774516.html
I have a couple of servers out there running NT4 on small old scsi hard drives and I want to ghost them to newer ide hard drives.
The question I have is how do I avoid the bsod when NT4 tries to b...
http://www.experts-exchange.com/Networking/Windows_Networking/NT/Q_21037515.html
I have a system that has a Gigabyte mobo, Adaptec SCSI contoller (card) with 2 Seagate Cheetah 73GB 15K drives, & also with a 160GB IDE drive that contains the OS & apps. I have purchased a WD 400G...
http://www.experts-exchange.com/Storage/Misc/Q_21775033.html
Help urgently needed!!
A partition on a SCSI HD in one of our Dell PowerEdge 2650's has vanished over the weekend,
No warnings in EventViewer, the other partitions on the drive are showing.
...
http://www.experts-exchange.com/Storage/Misc/Q_21789945.html
OS: Fedora Core 4
SCSI card: Adaptec 29160
SCSI HD: IBM
I feel like a goof asking this but I can't find the darn HD! The BIOS sees the SCSI card and HD and I was able to format it from the SC...
http://www.experts-exchange.com/Storage/Misc/Q_21896296.html
Hello all,
I would like to know the software utility to add scsi drives to a partition using RAID-5.
I know I would have to add the drives to the RAID-5 then how would I get them into the par...
http://www.experts-exchange.com/Storage/Misc/Q_22115998.html
I have a 2 SCSI drives that make up RAID 1(Mirror), I noticed one of them doesn't have lights on (it seems like no activity) This is a novell netware server, I rebooted it and went to the smart arr...
http://www.experts-exchange.com/Microsoft/Hardware/Q_22411604.html
I am working on a Compaq Proliant server with an external Fiber Channel array of twelve Compaq 18.2GB 7200 RPM Wide Ultra SCSI drives in a RAID5 configuration. One of the drives in the array has go...
http://www.experts-exchange.com/Hardware/Misc/Q_20595751.html
I have an older Compaq Proliant ML350 P-III that I am trying to put back in service with newly acquired (but used) SCSI drives. There does NOT seem to be any utility such as SCSISelect available....
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/MS_DOS/Q_21640805.html
Zones:
MS DOSDate Answered: 11/27/2005 Grade: B Views: 4
