Advertisement

1 - 8 of 8 containing alltags:("SCSI Error") (0.001 seconds)
I have a Maxtor 760 meg hard drive model XT-8760S. I can "see" it on the SCSI chain with FWD HD Tool Kit ver. 1.6.2. When I try to format this drive I get the following message: SCSI Error Code Inf...
Zones: Apple OSDate Answered: 02/21/1998 Grade: C Views: 0
I get the following error message when booting my server. It has a SCSI controller card (Adaptec 29160) and a SCSI hard drive: Unexpected SCSI Command Failure Target SCSI ID: 2 SCSI ...
Zones: Servers, HardwareDate Answered: 11/16/2007 Grade: A Views: 4
I'm running ARCSERV 6.6 on a NT4 DELL server with a Seagate STT3401A (IDE) tape backup. I get the following error in the arcserv log- E6300 Windows NT SCSI PORT Error.  I have deleted the job and r...
Zones: Drives / StorageDate Answered: 09/05/2004 Grade: B Views: 4
I have a HP Proliant ML370 G4 server running Windows Server 2003 SP1.  I am trying to attach a Quantum ATL Superloader tape backup unit to the scsi ports on the back of the server.  When I try to b...
Zones: Drives / StorageDate Answered: 12/18/2006 Grade: A Views: 0
Hello What sort of things can I do to try and rectify an error in Arcserve r11.5 sitting on an SBS 2003 server. When I run a backup in Arcserve, it will complete and report as being successful...
Zones: Backup / Restore Software, SBS Small Busin...Date Answered: 02/23/2007 Grade: B Views: 107
I have read RH FAQ article ID: 9001 and see that this is "caused by a reset on the fiber channel switch" but what does this mean? Is this something that may need correcting on the SAN (or in betwee...
Zones: Red Hat Linux, Storage TechnologyDate Answered: 09/23/2008 Grade: B Views: 8
Recently installed a new HP LTO Ultrium 2 drive in a Small Business Server.  Using SBS Backup (ntbackup) the backup runs through fine until it gets to the verification stage, whereby it logs the fo...
Zones: SBS Small Business Server, Backup / Restor...Date Asked: 08/18/2008 Points: 500 Comments: 2
  • 1