Hello,
I have a stand-alone windows 2000 web server, it is not attached to an internal network - but it does have direct access to the internet. It hosts a few websites (not huge traffic), and r...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_20456698.html
hello every one !
i have a 32 bit SMC ethernet card.
when i put the card in pcmcia slot , windoz freeze so i cannot set the driver for the card
when i pull the card , everything come back fi...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_20512622.html
Zones:
Windows XPDate Answered: 02/14/2003 Grade: A Views: 4
Dear All,
I would like to setup a network to the outside world as follows:
WAN
|
|
Router R1 (Router + Firewall, SMC Netwo...
http://www.experts-exchange.com/Networking/Linux_Networking/Q_20703003.html
Zones:
Linux NetDate Answered: 04/19/2005 Grade: A Views: 0
i recently got a new computer and i need to re-set up the internet. i have the software (speedstream for usb connection) and i have already installed it, but i dont know what to do next. there are ...
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_20992579.html
Zones:
DSL / CableDate Answered: 05/18/2004 Grade: A Views: 0
Hi,
I am currently upgrading my broadband facilities. I have acquired an SMC Router (SMC7008ABR) and I hope to use it with a D-Link DSL-300T ADSL Modem. My ISP has stated that the modem needs ...
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_21188685.html
Zones:
DSL / CableDate Answered: 11/27/2004 Grade: A Views: 0
I have a Toshiba Satellite Laptop(512 mg ram P IV) with one PCMCIA slot that refuses to install wireless cards correctly.
I used to be able to switch back and forth between a USB 2.0 card (whic...
http://www.experts-exchange.com/Hardware/Misc/Q_21898080.html
Zones:
Hardware,
PCsDate Answered: 07/28/2006 Grade: B Views: 12
I have an unidentified Ethernet card here I am looking for, ISA.
The part # is 60-600464-001 rev.A.
The primary chip is labelled SMC Chips.
The chip # is 83c790qfp
The brand of this card is unk...
http://www.experts-exchange.com/Hardware/Misc/Q_10200490.html
Zones:
HardwareDate Answered: 09/13/1999 Grade: A Views: 0
MESSAGES: ...cannot find IP configuration...DHCP client was unable to obtain an IP network address from a DHCP server...runtime error D:\VTRUCK.EXE abnormal program termination...windows sockets in...
http://www.experts-exchange.com/Networking/Windows_Networking/9x/Q_20405568.html
I am using an SMC Barricade, and I am unable to correctly set up my website.
I can access the "Test Page for Apache..." by using http://localhost/ http://127.0.0.1 or even http://192.168.2.30
...
http://www.experts-exchange.com/Software/Server_Software/Web_Servers/Apache/Q_20668748.htm...
If I have a block of 8 static ip addresses (6 useable, 1 for router, 5 spare), and I want to route the 5 spare addresses to just 1 box, how would I go about it?
This is what I want to do:
...
http://www.experts-exchange.com/Networking/Misc/Q_20777851.html
