I have about 7 switchports where I cannot get any network connectivity. I plug my laptop into another port and it works fine. All ports have identical config. One difference is that the link lig...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_22725399.html
I currently have 2 Procurve 4000M with 80 ports hooked between them on a 96 port patch panal. All pcs nics are 100's with a few 10 for printers. We also have 4 Servers with dual 1000 nics on them. ...
http://www.experts-exchange.com/Networking/Misc/Q_21827559.html
I'm trying to create a separate VLAN for testing purposes with a Linksys SRW2048 switch. Our current setup is 4 Windows 2003 servers connected to this switch which is connected to a PIX 506E. I...
http://www.experts-exchange.com/Networking/Windows_Networking/NT/Q_22464197.html
Hello all,
I currently have a Linksys SRW2048 switch in our core, with 8 ports designated as VLAN 200. I have a fiber uplink to a cisco 2950. I am trying to get one of the ports on the 2950...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21854227.html
Zones:
RoutersDate Answered: 05/17/2006 Grade: B Views: 0
Hello to all,
I am trying to decide what is better: to setup a VLAN ( I have 2 Linksys SRW2048 switches that support up to 256 VLANS )....or to create a second subnet.
I have an Engineerin...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23031507.html
I have a network with about 50 users and I need to control / limit the bandwidth from users. I several issues from streaming audio, video, downloads and other internet usage. Some things are work...
http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_23057680....
I have two Linksys SRW2048 switches, currently connected too each other with 1 of the miniGBIC ports. I would like to maximize the throughput between the two switches, and would like to use all 4 m...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23089139.html
What is the best way to connect 2 Linksys SRW2048 switches? i am looking to get the maximum amount of data throughput.
the linksys MGBSX1 with a fiber LC/LC patch cable or
a cat5e crossover cab...
http://www.experts-exchange.com/Networking/Misc/Q_21975763.html
I co-own and operate an Internet cafe with 40 stations. All hardware is identical. I use a master station where I setup the system as desired, then create an image from this station and distribute ...
http://www.experts-exchange.com/Storage/Backup_Restore/Norton_Ghost/Q_22907087.html
My company LAN is currently using the subnet 192.9.200.0 / 255.255.255.0 . I am coming close to running out of IP addresses, but am unsure on how to properly segment / expand the network while ens...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_22548770.html
