Advertisement

1 - 10 of 23 containing alltags:("Smart UPS") (0 seconds)
I have an APC SmartUPS 700.  Occasionally I look at the front panel of it and notice that all 5 of the Battery Charge Line Voltage LED's are flashing on and off.  What does this mean?  Sometimes it...
Zones: PCs, HardwareDate Answered: 06/23/2008 Grade: A Views: 62
We have a Smart-UPS 1400 that needs the battery replaced.  However, we would like to be able to do this replacement without bringing down the server connected to it.  Is it possible to replace a ba...
Zones: Power Supplies / UPS, HardwareDate Answered: 05/12/2008 Grade: A Views: 66
Hi all, I have a APC UPS we just got and would like to buy a Network Management Card for it but I have a question before I do. We would like to install the agent on all our servers and have ...
Zones: Power Supplies / UPSDate Answered: 08/20/2008 Grade: A Views: 12
I replaced the batteries in my smart ups 600 and now all the thing does is beep.  I can not get it to work anyway I try.  Any cluse. Bought refurbished batteries, no lights on the front just a c...
Zones: HardwareDate Answered: 06/14/2000 Grade: C Views: 0
Hi, I have a Smart UPS 700 connected to a Novell machine, which I need to swap out. I have never done this before, so would appreciate assistance on how to swap it out with the new one. Ma...
Zones: HardwareDate Answered: 07/26/2005 Grade: B Views: 0
I set up my APC Smart-UPS 1500 to shut down my server when the UPS run on battery for 1 minute and then turn back on when the UPS is 90% charge (second option from the wizard). The shutdown part wo...
Zones: Power Supplies / UPSDate Answered: 04/03/2007 Grade: A Views: 0
I have a UPS SMART UPS 2200 with 8-Port Share-UPS Interface Expander. I had a power failure over 1 hour and the servers did shutdown based on the UPS power down feature. However upon power re...
Zones: Windows 2003 Server, Windows 2000, Power Supplies /...Date Answered: 03/11/2008 Grade: B Views: 5
I have a UPS that was installed before I was here, everything was already plugged in, except for the bottom three 120v outlets.  I plug in the cable for the new equipment and it gets no power.  Is ...
Zones: Power Supplies / UPS, Hardware, Networking H...Date Answered: 07/11/2008 Grade: A Views: 0
Can't for the life of me get them out of this sucker.  Looking for the manual online, but the oly one I could find on APC site is crap.  Got the front panel off and have disconnected the battery.  ...
Zones: Power Supplies / UPSDate Answered: 07/18/2008 Grade: B Views: 13
Hi, I have an APC smart ups 5000 rt. There are many  network shutdown clients for windows linux and more... but  for IBM iSeries? Best regards
Zones: Power Supplies / UPS, AS / 400Date Answered: 10/14/2008 Grade: A Views: 4