I want to be able to print out cross sections of long objects that changes chape over their length, like boat hulls. Like one cross section view every 100 mm for example.
Is this possible? How?
http://www.experts-exchange.com/Software/Photos_Graphics/CAD_Architecture/SolidWorks/Q_233...
When Mirror Entities is applied on a closed curve made up of sections its mirror image appears infested with multiple small green squares which I have to remove one by one by clicking on each one i...
http://www.experts-exchange.com/Software/Photos_Graphics/CAD_Architecture/Q_24352435.html
Zones:
...Date Answered: 04/25/2009 Rating: 6.4 Views: 4
Suppose you're tone with your model in SolidWorks 2008 and you want to submit it to a shop with a CNC machine to have it manufactured. What is the file you have to save it to and how does this whol...
http://www.experts-exchange.com/Software/Photos_Graphics/CAD_Architecture/Q_24352482.html
Zones:
...Date Answered: 04/27/2009 Rating: 6.4 Views: 0
How can I convert a closed curve made of separate sections (arcs, lines, splines) into a continuous closed curve?
http://www.experts-exchange.com/Software/Photos_Graphics/CAD_Architecture/Q_24352461.html
Zones:
...Date Answered: 04/27/2009 Rating: 6.4 Views: 0
Hi,
We have two seats of solidworks 2009. We are in the process of learning the software and could do with some clarity on an issue.
We had a third-party create 3 templates, that in hindsight ar...
http://www.experts-exchange.com/Software/Photos_Graphics/CAD_Architecture/SolidWorks/Q_247...
We currently have a laptop that has solidworks 2008 installed on it. Every time we lanch the program and start editing somthing it will freeze every 40 seconds or so. Sometimes we can unfreeze it...
http://www.experts-exchange.com/Software/Photos_Graphics/CAD_Architecture/SolidWorks/Q_233...
All,
I am not a programmer in anyway. However, I have been tasked with the project of using the Solidworks API to automate the quoting process here. What they want is to read the dimensional dat...
http://www.experts-exchange.com/Software/Photos_Graphics/CAD_Architecture/SolidWorks/Q_238...
All,
I am not a programmer in anyway. However, I have been tasked with the project of using the Solidworks API to automate the quoting process here. What they want is to read the dimensional dat...
http://www.experts-exchange.com/Software/Photos_Graphics/CAD_Architecture/SolidWorks/Q_238...
All,
How do I link a macro to a button or shortcut in Solidworks?
Naerwen
http://www.experts-exchange.com/Software/Photos_Graphics/CAD_Architecture/SolidWorks/Q_238...
