Advertisement

1 - 9 of 9 containing alltags:("Soundpoint") (0.001 seconds)
I've got a Dell 3448P POE switch that I am trying to power a Polycom 501 with.  Any clue if this is supposed to work?  Everything I read states they are both 802.3af compliant as long as you use th...
Zones: Networking Hardware, Switches / HubsDate Answered: 08/27/2008 Grade: A Views: 30
When I dial a number longer than 8 digits without using handset it's fine but when I pickup the handset and dial a number longer than 8 digits I get a busy signal automatically how can i fix this???
Zones: VoIP, Telcom Services, Asterisk Date Answered: 09/12/2008 Grade: A Views: 0
Hello, I just purchased a Polycom Soundpoint 400 off of ebay to test with asterisk and Im having alot of problems configuring the phone initially. Can someone tell me how to do this? I have succes...
Zones: VoIPDate Answered: 05/19/2007 Grade: C Views: 0
Here's what we have.  I have a Polycom SoundPoint IP phone that I have been asked to connect to a Clients Asterick box that has a Public IP address.  The Polycom Soundpoint is  behind a Checkpoint ...
Zones: Telecommunications, VoIPDate Answered: 05/31/2007 Grade: B Views: 0
I have a polycom soundpoint ip 330 and when it tries to boot i get error message stating: error loading 0004f21b52f7.cfg i am a newbie to this, how do i give the phone the right config file....
Zones: VoIPDate Answered: 05/28/2008 Grade: B Views: 61
Hi all, I work remotely for an office in New York that recently provided me with a Polycom SoundPoint 501 SIP phone that I've setup to connect to their PBX server through my Linksys WRT54G wirel...
Zones: IP Telephony, Routers, VoIPDate Answered: 03/27/2008 Grade: A Views: 23
I am unable to find purchase listings for Polycom Sounpoint IP 100 VOIP shoreline shortel phones.  I can find them on Ebay - but would rather purchase from a trusted reseller.  Anyone have any sugg...
Zones: VoIPDate Answered: 09/09/2008 Grade: A Views: 0
I've been working on this project for my employer for almost 13 hours straight, and it's driving me crazy. We're moving to a hosted IP PBX phone system and we have polycom phones. We also have a Ca...
Zones: DHCP, Routers, VoIPDate Asked: 11/18/2008 Points: 500 Comments: 1
How to configure asterisk and Polycom (ex. sip.cfg or phone.cfg) to set BLF on and monitor lines. not only off and on but I need to know when each extension is having call. i tried to set in si...
Zones: VoIP, IP PBX, Asterisk Date Asked: 09/16/2008 Points: 500 Comments: 10
  • 1