Enter Keywords:
1 - 10 of 705(0.019 seconds)
Sort By:
 
I plan to have a few unicast streams via Windows Media Services.  What is the command to give priority of the traffic used when streaming MMS unicast streams?
Zones: Cisco PIX FirewallDate Answered: 10/06/2007 Rating: 9.2 Views: 0
I would like to enable vpn client to vpn client communications (spoke to spoke).  The hub is a Cisco ASA 5510 running 7.0(7).  The spokes are laptops running the Cisco VPN client version 5.0.02.009...
Zones: VPN, Cisco PIX Firewall, I...Date Answered: 03/26/2008 Rating: 9.9 Views: 10
Does anyone know of a nice, easy, cheap method of monitoring bandwidth usage on an ASA 5510?  I just put it in to replace an old Sonicwall.  The one thing I liked about the Sonicwall is that I coul...
Zones: Hardware Firewalls, ...Date Answered: 07/07/2008 Rating: 7.2 Views: 121
I have an ASA 5510, and still have the PIX 515e it replaced.  I want to use the PIX 515e as a ready spare in the event the ASA goes down.   Can I restore to the PIX, the backed up ASA current ru...
Zones: Hardware Firewalls, Cisco PIX F...Date Answered: 10/22/2008 Rating: 9.0 Views: 0
Ok, with ASA 5510 for ISP failover we change the default route to the new ISP manually or by SLA tracking and we get Outbound access, fine, How can we achieve Inbound access ? Say we have 10 odd st...
Zones: Cisco PIX FirewallDate Answered: 02/29/2008 Rating: 9.8 Views: 0
I am looking at buying an ASA5510 with AIP-SSM as a firewall for my company.  The only negative I see on it is the lack of monitoring capabilities.  I currently use a Linux iptables firewall with n...
Zones: Software FirewallsDate Answered: 01/16/2006 Rating: 8.2 Views: 36
I need some help configuring DMZs on an ASA 5510.   Here is how it is setup physically: Internet    | Router    | ASA 5510    |            | Inside    DMZ Switch (Cat 2960G)           In ...
Zones: Cisco PIX FirewallDate Answered: 04/09/2007 Rating: 8.2 Views: 0
First one of these I've done so appols for the stupid questions :) 1. Can the management Port be used as the failover port? 2. Ive set up eth0 outside sec 0 eth1 DMZ1 sec 50 eth2 DMZ2 sec...
Zones: Cisco PIX Firewall, Enterprise Fi...Date Answered: 04/17/2007 Rating: 7.8 Views: 37
Hi All, I have a small problem in Static routing of my smtp traffic.I can send mails but i can not receive any mails. The complete configuration is as follows, Any clue please.... : Sav...
Zones: Hardware Firewalls, Cisco PIX F...Date Answered: 09/12/2007 Rating: 8.2 Views: 4
I will use ASA 5500 series to configure VPN tunnel for my company. I have experience on configuring PIX 500 series model but no idea how to configure the ASA 5000 series. Is it some difference or s...
Zones: Cisco PIX Firewall, VPN, I...Date Answered: 01/09/2008 Rating: 9.4 Views: 0