Hi,
I've recently purchased an ASA 5510 security device from Cisco.
I have about 40 servers on my dmz network, and about 100 hosts that will access those servers on various ports.
Is it possible...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21974878.html
Hi Experts,
here's what I have:
I've configured the ASA for remote access vpn . Users are able to get connected and it works fine. But I need to get more granular because I have 19 more user...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_22018285.html
Hi folks,
I'm trying to update the cisco vpn clients (120 clients) version 4.6 to version 4.8 using the ASA's client update feature. I have configured the the ASA with the following command und...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_22028251.html
Hi all,
We have 2 ASA 5510 in state/failover configuration. All works fine, but on one of the ASA we get the following Error message executing the copy running-config startup-config.
%Error w...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have a PIX 506 that terminates three site to site VPNs, does some port forwarding, etc. that I would like to accomplish on the new ASA-5510. I just need the exact same functionality from my PIX ...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I need help configuring an new ASA device & I am fairly new at this and need some help.
I have a range of public ips 71.X.X.114 71.X.X.126 need to accomplish the following:
Ø I need to have a...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_22702847.html
I have two Cisco ASA's running code 7.2(2). I'm migrating the vpn from one of the devices from an old firewall to the new ASA. The new vpn is working fine, but the ASA box had the following lines...
http://www.experts-exchange.com/Networking/Security/IPSec/Q_22827942.html
I have wireshark running on a span port monitoring my ASA outside interface. I put a filter on a certain hosts public IP. Wireshark is reporting tons of TCP retransmissions, a couple of TCP Window ...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
HI,
Is there standard ASA configuration that I could start with, so that I could modify basic information (IP address, gateway, etc) in order to setup a NAT and VPN tunnel to another branch office...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have created a VPN client profile in my ASA box and user id (with command username xxx password).
Is there any way to restrict those user account that is only used for VPN client connection (...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
