Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 14(0 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

7.1
I am wondering if it is possible to use my Firebox X20E to protect a Microsoft FTP server against a brute force attack.  I have times where over the coarse of 2 minutes or so I will have 100 logged...
Zones: Watchguard Firewall, SecurityDate Answered: 06/30/2008 Views: 14
I will first explain my original set up so i will be easier to understand where I am coming from. We have an existing 25 port switch which I believe basically connects all our computers on the ...
Zones: Hardware FirewallsDate Answered: 12/04/2007 Views: 17
A couple of general questions.  I'm setting VPN for remote user access to corp networ. Pros/Cons for SSL versus IPSEC?   I was planning on using SSL as I assumed the major advantage to this c...
Zones: Watchguard Firewall, VPNDate Answered: 01/05/2009 Views: 0
Hi guys, I am tring to configure Watchguard log server I have installed WSM on my computer for test. I have configured the watchguard log server, all logs are sent in documents and settings in...
Zones: Watchguard FirewallDate Answered: 12/22/2008 Views: 4
Problem: Need to change external interface MTU to 1400. This DSL provider recommends the external interface of the Firebox to be set to 1400 versus the standard 1500. Unfortunately, the x20e standa...
 
Related Solutions:
Watchguard Firebox X700 MTU

I have a Firebox X700. I am attempting to change the MTU but cannot find where to change it. This...

Tags: Watchguard, Firebox, X700, MTU| Rating: 9.2
 
Zones: Hardware Firewalls, RoutersDate Answered: 01/16/2008 Views: 57
Before I start let me say this is my first post to the site and sorry for the size of the post. I have a problem with a watchguard firewall at my corporate office Firebox III/2500 and Firebox x20e...
Zones: Watchguard Firewall, Networking, VPNDate Answered: 11/06/2008 Views: 0
Hi, I have a wathguard X700 with many edges and soho's scattered about.  for the most part I have connected VPN's that are configured as a spoke and hub or star arrangment. I have 2 devices (...
Zones: Watchguard FirewallDate Answered: 10/28/2008 Views: 8
We have an office in the UK with a  Watchguard Firebox X1000 connected to two other UK offices with Firebox X700 and an office in the Isle of Man with a Firebox II. All of these offices are connect...
Zones: VPN, Security, Watchguard FirewallDate Answered: 10/21/2008 Views: 14
I have a user setup on the firebox and the vpn works.  Apparently watchguard says you can setup the user or VPN client up to get a dhcp address and use other dhcp settings(dns wins etc).  I have re...
Zones: VPN, Hardware Firewalls, Watch...Date Answered: 09/13/2007 Views: 13
Hi Guys, I am trying to create a vpn connection to my watchguard X20. I have created a user. And it's settings are good. When I try to connect here is the error message : IKE Phase 1 error T...
Zones: VPN, IPSec, Watchguard FirewallDate Answered: 11/12/2008 Views: 59