Hello, I am trying to connect three offices together for a mortgage company. Here is what we have:
1- W2K Server / 20 users
Adtran total access CSU/DSU (running DHCP - our link to the inte...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_20508554.htm...
Zones:
VPNDate Answered: 02/28/2003 Grade: A Views: 0
Our organization is currently looking to upgrade our networking equipment between our hedquarters and 5 remote locations. We have two different companies proposing Adtran Netvanta routers and Cis...
http://www.experts-exchange.com/Networking/Broadband/Frame_Relay/Q_20923595.html
Zones:
Frame-RelayDate Answered: 03/23/2004 Grade: A Views: 5
I am trying to setup a VPN to my W2k RRAS with PPTP, but when I try to connect from outside the firewall, it times out with error 721 after trying to validate username and password.
I have creat...
http://www.experts-exchange.com/Networking/Misc/Q_20969535.html
Here is a situation.
We have a point to point t1 connection to each of these locations (location 1 and location 2)
CISCO 7206
| |
| |
Locatio...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_21371303.htm...
Zones:
VPNDate Answered: 03/31/2005 Grade: A Views: 0
Ok I received the T120 in the mail. I'm looking at the back of it. I see one v35 connection and one network connection. Theres a few other RJ45 slots unlabeled. Which one is for the redundant T1?
...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21453362.html
Zones:
RoutersDate Answered: 06/11/2005 Grade: A Views: 0
Hi,
I'm trying to create a IPsec link with two fortinet routers, one at each end of my PTP T1. The t1 goes into an adtran router. I have never worked with a ptp T1. I can create an IPsec li...
http://www.experts-exchange.com/Networking/Misc/Q_21848919.html
Anyone use the Adtran Tracer 6420 Radios Microwave? They operate in the 2.4 or 5.8 unlicensed frequency space. We are thinking of using these to connect two of our offices. Anyone have any expe...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_22620116.html
I am setting up a Cisco 7200 with a T3 card(PA-MC-T3) to work with the Adtran MX 2800. In other words I'm trying to bundel 27 T1 lines into a T3 at the Adtran level and pass them to the Cisco 7200 ...
http://www.experts-exchange.com/Networking/Misc/Q_20457820.html
Zones:
NetworkingDate Answered: 11/06/2003 Grade: A Views: 4
The following is my current setup
T1 -> Adtran3205 -> Watchguard SOHO 6 - > Local LAN
The 3205 wan port is connected to the T1 the 3205 LAN port(192.168.101.1) is connected to the SOHO WAN po...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20719537.html
Zones:
RoutersDate Answered: 09/04/2003 Grade: A Views: 0
I have a Cisco 4700 that is feeding F/R (yes F/R Switching is activated) to a remote router (Cisco 1601 w/WIC-T1-DSU). On the 4700 side we are using an Adtran Smart16e Shelf w/ V.35 TSU cards. The ...
http://www.experts-exchange.com/Networking/Misc/Q_20773335.html
Zones:
NetworkingDate Answered: 10/28/2003 Grade: A Views: 0
