Enter Keywords:
1 - 10 of 268(0.006 seconds)
Sort By:
 
I've got 2 Aironet BR2040-E devices that were taken down from a facility that was no longer being used. I would like to find a new home for these however there is a password set on them that no one...
Zones: NetworkingDate Answered: 11/16/2004 Rating: 7.6 Views: 0
Hi all, I have an access point Aironet 1310. I want to Separate the management interface from the interface that the wireless users see; i.e, to forbid management access through the wireless inter...
Zones: Networking, Net...Date Answered: 05/04/2006 Rating: 8.8 Views: 0
Ok, now a routing question oer se. But here goes I have 3 sites, each with a Cisco 2950 and an Aironet 350 in bridge mode. Now, no matter how i try, i can not get VLAN's to work across the ra...
Zones: RoutersDate Answered: 06/12/2003 Rating: 8.6 Views: 0
I picked up a pair of Cisco Aironet 1200s recently. They both have 802.11g radios in them and I've upgrade both to IOS c1200-k9w7-tar.122-15.JA Here's the problem I'm having. I have some experi...
Zones: Networking, Netw...Date Answered: 06/24/2004 Rating: 9.0 Views: 0
Okay, so I have never setup an aironet before nor do I deal with Cisco all that much. Aironet 1200 gets delivered with no setup documentation.   After research, there is no "canned" IP that ...
Zones: NetworkingDate Answered: 03/21/2006 Rating: 6.6 Views: 0
CISCO AIRONET 1200: We have 20 node AP WIFI network. THE Cisco AIRONET 1200 series AP connect to Cisco Catalyst 500 switches. We use power over Ethernet. The problem is, when we roam it can take 5 ...
Zones: Routers, ...Date Answered: 03/09/2008 Rating: 9.1 Views: 9
I have a cisco aironet that the password was forgotten from I have tried to follow the directons on the cisco websight using the console but they do no make any sense. It is a 1200 series aironet a...
Zones: Networking Hardware, Wireless Netw...Date Answered: 07/25/2007 Rating: 8.0 Views: 0
I recently purchased this aironet 1200 series AP and was upgrading the firmware. It seemed to complete successfully but I am no longer able to access it. Is there a way to reset this to factory def...
Zones: Wireless Access Points, Wireless Network...Date Answered: 12/21/2007 Rating: 7.6 Views: 76
We have a small (30-people) office in a downtown location with approx 10-20 other wireless networks around us.  We have a brick wall dividing the office in two long and narrow sections.  We use wir...
Zones: WLAN, W...Date Answered: 09/07/2008 Rating: 8.0 Views: 4
Hi all Im using cisco aironet AP, my actually SSID's are just hidden, how can i do to securise  the ssid's with an wep key  and an mac address acces list if possible. Regards my current  r...
Zones: Wireless Networking, R...Date Answered: 02/13/2009 Rating: 8.6 Views: 4