Enter Keywords:
1 - 10 of 32(0 seconds)
Sort By:
 
ok I own 4 hot swapable PSUs they are all Antec Model: RPP-403 Redundant Power supply n+1 (what ever that means ) on the package. input: 115/230v 47-63Hz 9A/4.5A Output: 400W +5v +12v -...
Zones: HardwareDate Answered: 03/17/2005 Rating: 7.4 Views: 0
This is a computer that we use at work.  I can find no other information about the computer.  I have hooked it up to 3 different monitors, and they all stay dark, then go to sleep.  If I disconnect...
Zones: Monitors / Displays, CRT Mo...Date Answered: 03/19/2008 Rating: 9.5 Views: 0
WITH HOW MANY LED FANS DOES ANTEC 900 CABINET. WITH OUT ASKING FOR OPTIONALS  FANS..
Zones: Components, Fans / Cooling, MS Hardwar...Date Answered: 07/15/2008 Rating: 8.4 Views: 0
I have a napoliII motherboard with 512mbram and 50GBHD. My system was running great and when I went to boot up the other day It didnt work, basically when you push the power button it starts as if ...
Zones: MiscDate Answered: 12/28/2002 Rating: 7.4 Views: 0
Hi, Just building my first PC.  What I need to find out before I switch on my PC for the first time is to discover how to check that the correct voltage is set for the mains supply system.  I have ...
Zones: Hardware, ComponentsDate Answered: 09/15/2004 Rating: 8.4 Views: 0
System: Asus A7V333 mobo (Bios Rev. 1015, the latest I could find) Athlon T-Bird 1.4Ghz 256 MB Corsair PC2100 2.5CL Gainward GF4 Ti 4200 40GB IBM Deskstar 40GXP Lite-On 32x12x40x CD-RW Lite-...
Zones: HardwareDate Answered: 12/11/2002 Rating: 8.8 Views: 0
I am trying to hook up my FIC KA-6110 to some cheap case that says Antec outside on the front cover  manual http://www.fic.com.tw/support/motherboard/document.aspx?model_id=12 I know where ...
Zones: Hardware, ComponentsDate Answered: 05/23/2003 Rating: 8.8 Views: 8
Evvery time I turn on my computer it starts it then beeps 5 times hi, lo, hi, lo, hi.  It then just powers down.  I can restart it immediately and oes about the same things.  If I don't use it for ...
Zones: Hardware, ComponentsDate Answered: 01/14/2005 Rating: 7.0 Views: 0
Hi, I just purchased a new Antec P150 case with an Antec Neo HE 430W power supply. The PSU has a 24 pin power supply connector, and although the last 4 pins can be broken off there is a message tap...
Zones: Hardware, ComponentsDate Answered: 02/24/2006 Rating: 9.6 Views: 0
I need to order and don't have time to figure all this out.  I have selected the Antec Sonata for my case.  Now I'm looking for the round cables.  Can someone give me a list of what round cables I ...
Zones: Hardware, ComponentsDate Answered: 07/15/2006 Rating: 8.4 Views: 0