Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 589(0.009 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

8.8
Hello everyone, Our organization is currently looking at upgrading our phone systems.  We currently have 7 office sites around our state, which all have old key based phone systems.  One avenue ...
Zones: VoIPDate Answered: 11/21/2004 Views: 28
Hey, so far I have in my sip.conf  under the phone im using context=sipoutgoing then in extensions.conf I have [sipoutgoing] exten => s,1,Dial(Zap/1) but that doesnt work I just want to ...
Zones: VoIPDate Answered: 04/21/2005 Views: 0
Hello, Next to the documents name in a forms title bar, i need to also indicate if unsaved changes have been made.  Whenever an unsaved change has been made, an asterisk (*) should appear follow...
Zones: MS Visual BasicDate Answered: 05/12/2005 Views: 0
I have a newbie question about the dialplan. I have a main menu that picks up on a certain DID number, and gives a list of options. When an option is selected, for instance 1 for sales, it rings a ...
Zones: VoIPDate Answered: 09/13/2005 Views: 0
I have a question related to situation where I need to select specific records.  Allow me to elaborate... My users are greeted with a form & a couple of drop-down boxes to allow which department...
Zones: MS AccessDate Answered: 07/14/2005 Views: 0
I have an Asterisk@Home server.  I am unable to receive incomming calls even though I can make outgoing calls.  Incoming calls are transfered to broadvoice VM.  I have put my conf. files below.  I ...
Zones: VoIPDate Answered: 08/31/2005 Views: 0
I am running Asterisk@Home, Asterisk v1.0.9 I have a TDM11B (1FXO 1FXS). My ZAP extension belongs to group 1, the number is 200 My ZAP trunk belongs to group 0 I also have an IAX2 extensi...
Zones: VoIPDate Answered: 10/18/2005 Views: 38
Hi,   I have a fresh install of AAH2.  I have a digium TDM04B 4 port card.  I have three POTS and one Vonage line.  The 3 POTs are plugged into port 1,2,3 and the Vonage is plugged into port 4 of ...
Zones: VoIPDate Answered: 01/16/2006 Views: 0
how many calls asterisk can handle in an hour .my need is 500 calls per hour and what system is suitable for it intel xeon processor p4 or 64 bit cpu??
Zones: VoIPDate Answered: 03/13/2006 Views: 0
When an agent logs into a queue using AgentCallBackLogin, he should be ready to take calls until he logs out right?  For some reason the first time a customer calls the queue, it rings the agent ju...
Zones: VoIPDate Answered: 02/13/2006 Views: 0