I have 2 point to point T1's to a remote office. One for voice and one for data. The voice T1, due to some changes, is only utilizing 4 of the 24 channels. We are looking at bonding the re...
http://www.experts-exchange.com/Networking/Misc/Q_21593212.html
Zones:
NetworkingDate Answered: 10/18/2005 Rating: 9.6 Views: 0
Im trying to figure out the best way to bond 4 T1 together.
Im going to have one T3 at our Headquarters and there will be about 10 branch offices. Some of these just need one T1 but. Some need...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21723427.html
Zones:
RoutersDate Answered: 02/06/2006 Rating: 9.4 Views: 0
Hi Experts
Qwest installed 2 bonded T1's. At the demark there are 4 rows of terminals (4 each)
Circuit 1
Yellow/Black/Red/Green
Yellow/Black/Red/Green
Circuit 2
Yellow/Black/Red/Green
Yell...
http://www.experts-exchange.com/Networking/Telecommunications/Providers/Q_23862194.html
Looking at bonding 4 T1's (multilink PPP) and need a sanity check on my hardware choice.
Currently have a Cisco 2801 but can only fit 2 WIC cards in it, so I need to upgrade.
My thinking is a...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_24892192.html
Zones:
RoutersDate Answered: 11/13/2009 Rating: 9.3 Views: 5
We currently have two T1's bonded together from the same provider.
We would like to purchase a third T1 line from a seperate provider as a backup in case the one provider goes down.
What kind...
http://www.experts-exchange.com/Networking/Telecommunications/Providers/Q_20970822.html
We have a 7206 with a 4 port T1 controller and we're trying to establish a bonded T1 connection to a 1720 router with two T1 WIC cards. We have configured two of the T1 controller ports with chann...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21458018.html
Zones:
RoutersDate Answered: 06/27/2005 Rating: 8.4 Views: 58
Hi there
I have an 2600 series router with 2 WIC-1DSU cards and two T1s from the same ISP.
I have to use MLPPP since that is what my customer requests :)
Do you have any sample configs? I need h...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21545556.html
Zones:
RoutersDate Answered: 09/02/2005 Rating: 8.8 Views: 0
First, I am far from an expert on cisco but do understand the technology and can rationalize, so with that said pardon my terminology.
Currently I have a remote site that is connected to the mai...
http://www.experts-exchange.com/Networking/Misc/Q_21748723.html
Zones:
NetworkingDate Answered: 02/25/2006 Rating: 7.6 Views: 0
This is probably an easy question for anyone who constantly programs routers, but I am having an issue. I currently have a Cisco 2621 with two single port WIC's installed. These are bonded together...
http://www.experts-exchange.com/Hardware/Routers/Q_22037048.html
Zones:
RoutersDate Answered: 10/25/2006 Rating: 9.0 Views: 49
I have a Cisco 3640 and have (2) NM-8T1-IMA cards. Can I bond T1's across these modules?
IF so, how do you make that happen?
Thanks a lot
VarData
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22807967.html
Zones:
RoutersDate Answered: 11/06/2007 Rating: 9.2 Views: 0
