Enter Keywords:
1 - 10 of 56(0.001 seconds)
Sort By:
 
what I am looking for is a good network tool kit that has tone and probe crimp tool impact tool with 110 blade cable cuter and stripper cable tester (there is so many to choose from, I just ne...
Zones: Networking, NIC C...Date Answered: 03/12/2004 Rating: 9.0 Views: 0
I ran into an issue after taking over a Network Admin job at a local company. Turns out the guy before me ran wiring from the wall directly into a switch, with no patch panelling whatsoever inbetwe...
Zones: Network CablesDate Answered: 11/13/2008 Rating: 9.0 Views: 0
I want brief information about cat5 cabling. The squence of wiring and what are different types of cabling that we can do in cat5 e.g. Standard cabling,cross cabling and there wire squence.
Zones: Hardware, NIC...Date Answered: 12/23/2003 Rating: 8.3 Views: 0
I have a workshop in the back of my house and I want to run a singe Cat5e cable underground to the workshop to give my workshop connectivity. I have looked @ monoprice.com and I could not find any ...
Zones: Network Cables, Networking, DSL / Cabl...Date Answered: 03/01/2008 Rating: 9.0 Views: 0
I am running Cat5e cable back to a switch for a network.  Some of our home runs are over 300 ft. long.  Can I put a switch in the middle of these long runs to make it work?  Will that power the lin...
Zones: Network Cables, Networking, Switches / Hub...Date Answered: 06/26/2008 Rating: 7.6 Views: 0
I have a few PC's connected to a 10 Mbps HUB. Today I wanted to add the living room PC to the net but did not have any real CAT5 UTP cable long enough so I took a 4 wire telephone cable instead. Si...
Zones: Networking, TCP/IP, Netwo...Date Answered: 09/05/2000 Rating: 5.4 Views: 0
Please help!   What's the maximum length of cat5 cable?, because I trying to created a cable with 190 feet length, and I got a problem, I see the hub's ligth is slow  blinking. and The computer th...
Zones: Networking, NIC C...Date Answered: 06/06/2001 Rating: 6.6 Views: 0
I am a beginner in networking stuff and would like to get help with the following simple questions. I want to install network jacks onto the walls to set up a network between two rooms. On the cat5...
Zones: Networking, NIC C...Date Answered: 12/10/2002 Rating: 7.0 Views: 200
I have a problem with a CAT5 cable that I am trying to install. I have have laid a straight through CAT5e cable about 25-30 meters in length.  This goes from a network card in a server to a swit...
Zones: Networking, NIC C...Date Answered: 07/26/2004 Rating: 7.4 Views: 0
I am undecided whether to spend the money on Cat6 or wire my 5 story building using Cat5E. Iwill have several offices, computer labs, classrooms with a total of approx. 450 ethernet drops.  this...
Zones: Networking, NIC C...Date Answered: 03/18/2005 Rating: 6.8 Views: 0