Hi experts,
Have a simple question here.
We are in the process of setting up a network environment in a 25,000 square feet retail store.
I got some feedback saying that better to split...
http://www.experts-exchange.com/Networking/Misc/Q_20586748.html
okay I'm hoping someone out there knows if this is possible, I have two locations joined together by a rg6 cable. I want to know if I can network them together using the rg6? speed doesn't need to ...
http://www.experts-exchange.com/Networking/Broadband/Q_21763113.html
Zones:
BroadbandDate Answered: 03/07/2006 Rating: 7.0 Views: 0
I have a current employee who's phone is connected to a normal phone punch board
the type of cable is a 8 pair cable (12 lines)
We are moving this user to another location... I ran a cat5e line...
http://www.experts-exchange.com/Networking/Telecommunications/Providers/Structured_Cabling...
OK, off "IT" topic, but networking question just the same.
I just bought a home that is wired with 38 CAT5 network runs that are punched down to wall jacks through-out the house. The other end ...
http://www.experts-exchange.com/Networking/Misc/Q_20562909.html
I have a workshop in the back of my house and I want to run a singe Cat5e cable underground to the workshop to give my workshop connectivity. I have looked @ monoprice.com and I could not find any ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Cables/Q_23206584.html
I am running Cat5e cable back to a switch for a network. Some of our home runs are over 300 ft. long. Can I put a switch in the middle of these long runs to make it work? Will that power the lin...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Cables/Q_23518975.html
Hi all,
I've been trying to first identify and then try to find and purchase different types of RJ45 jacks. There are a few cases that I'm considering and I'll lay them out here for you based on t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Cables/Q_24354679.html
I have a small network with 15 computers.
Two computers are located a few hundered feet from the hub. Server NT, work stations all pc os's.
The network had static IP addresses. I installed a ...
http://www.experts-exchange.com/Networking/Misc/Q_20286339.html
I want to run a cat5 cable inside a building (connected to RJ45 jacks on both ends). I need to know the order/color of the wires to connect to the RJ45 jacks.
http://www.experts-exchange.com/Networking/Misc/Q_20373270.html
Hey all, this is a simple question. I simply want to know the distance you can run a CAT5 cable before it starts to lose data.
http://www.experts-exchange.com/Networking/Misc/Q_20448642.html
