In the company I work for, we have got a cisco catalyst 5509 switch as our distribution/core switch. As our network grow, we are experiencing slowness in the RSM's routing capability. We have now g...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21213111.html
Zones:
RoutersDate Answered: 03/09/2006 Rating: 8.8 Views: 0
I have a Ciscto Catalyst 4006 switch Supervisor Engine II (purchased around 2001). I would like to add a gigabit ethernet blade (Cisco part WS-X4424-GB-RJ45). I have not been able to verify that...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_22461078.html
Hi,
Has anyone encountered problem of having hosts within a switch not able to connect to the main router on a consistent basis eg: sometimes Host A can connect to router while B cannot and afte...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22828162.html
Is it possible to receive an alert (E-mail) when the port is disabled due to a port-security violation?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23412957.html
I have a Cisco Catalyst 4510R (dual Sup V) on one end of a building and a pair of cascaded cat 3750G switches on the other. There are multiple connection points between the locations that I can us...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23418378.html
Hi Expert
Please help!
Unable to ping public IP or ASA inside IP on Catalyst 2950 switch as an access level
My network topology is very simple.
Internet == Cisco 877 == Cisco ASA 5505 == Ca...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_24361735.html
I have a Catalyst 6513 with a L3 switching engine in it but I don't know if it will accept an IP address on a port. I can run "show ip route" but not "show ip int br" Is this really a layer 3 switc...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_24744967.html
Getting discard errors but port counters do not show any errors
example port 9/30 and 4/6
2009 Sep 11 12:38:35 %SYS-3-PORT_OUT_DISCARD:Port 4/6 detected 2026 output discard error(s) in last 3...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_24734975.html
I have a Network Attached Storage device that we just installed. If I want to monitor the utilization of the port 5/13 that goes to the NAS how can I do that. "sh mac" does not show utiliization su...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_24737505.html
Ok I am trying to enable SSH on a cisco 3524 XL switch. I think I need a newer ios, however when I go look it would appear I have the newest. I can not imagine that to be true. anyhow here is my sw...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_24885132.html
