Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 332(0.001 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

6.6
I have a Future Domain TMC-950 SCSI card and an NEC 3x (external) cd-rom drive.  When I attempt to install Redhat (v4.1), the setup program cannot detect my card.  Currently, it's set at CA00 and I...
Zones: Linux SetupDate Answered: 05/04/1997 Views: 0
I recently added a Newcom 8x cdrom to my Packard Bell 610. To do so I replaced the single HD IDE cable with a two device IDE cable.  Now when I boot I get the message "No boot sector on hard drive....
Zones: HardwareDate Answered: 11/27/1997 Views: 0
reinstalled windows over the top of old windows now i cannot access my cdrom or cdwriter all are connected ok to the motherboard etc, i didnt disconnect any thing
Zones: Windows 98Date Answered: 01/16/2000 Views: 0
SunOs 5.7. The problem is that I cannot open the CDROM, umount,mount(error of some wired file is locked) is not working as well. I think another user has a session open for this cdrom-drive. How ca...
Zones: SolarisDate Answered: 08/11/2000 Views: 0
I am attempting to install windows 95 on a 386 120mhz pentium with 15mb of ram. It was previously on this machine but the drive had to be formatted.   I have ms-dos 6.22 and win3.1 installed alrea...
Zones: Windows 3xDate Answered: 08/25/2000 Views: 0
I thought I was computer savvy but I guess not...Got a 466/66 with a formatted drive and Im trying to load 95 onto it. Of course the big problem is getting the stupid thing to find the CDrom (which...
Zones: Hardware, Sound CardsDate Answered: 05/21/2001 Views: 0
Hi, I have a problem with my CD drive whereby if a disc is already in the CD drive and I remove that disc and replace it with another disc, explorer can only see the contents of the previous disc,...
Zones: Windows 98Date Answered: 10/31/2000 Views: 0
Hi All I have a problem on a friends PC. The cdrom is listed in the post screen as an atapi 44x cdrom, (all drives set to auto in bios) and in the screen immediately before win 98 boots as a cdr...
Zones: HardwareDate Answered: 01/07/2002 Views: 0
How do I replace the drivers. I cannot find the origingal CDs and cannot find the information on Compaq's web site.
Zones: Windows 2000Date Answered: 10/31/2004 Views: 0
Hi, Does anybody know anything about these drives? I have been finding loads of reviews for the kenwood 52x true x and the kenwood 72x truex but cant find any suppliers in the uk or us..... ...
Zones: HardwareDate Answered: 07/08/2004 Views: 0