Hey
I have a simple circuit with a transistor and a LED.
I have a signal that comes in for couple of seconds.
I would like my transistor to stay on even after the signal is gone.
A li...
http://www.experts-exchange.com/Hardware/Misc/Q_20492221.html
Zones:
HardwareDate Answered: 02/05/2003 Rating: 6.8 Views: 0
I have 3 equations which solves, Current, Voltage across resister and Voltage across capacitor, which all involve time (t), I need to integrate a timer (t) into the equation as well as 3 progress b...
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/VB_Controls/Q_20718872....
Zones:
VB ControlsDate Answered: 01/17/2004 Rating: 8.0 Views: 0
I have a dedicated T1 connected to a Cisco 2600 router. My internet speeds aren't as fast as I would expect from a T1(150KB/s). I've tried disconnecting everything from our Netgear switch and jus...
http://www.experts-exchange.com/Networking/Misc/Q_21701142.html
High there
I am trying to count the gears while a tractor is moving. The counter will be a microcontroller which will make some calculations in order to give some details vs the machine operatio...
http://www.experts-exchange.com/Hardware/Components/CPU_Processors/Q_21997555.html
Hello experts,
I really need your help now, and I need it very fast and explained in baby steps.
I have a circuit that is powered by a 1,5v battery. (see the attached file)
This circuit dedects ...
http://www.experts-exchange.com/Hardware/Components/Power_Supplies/Q_23964829.html
I would like to know if I am on the right path to prove that the two circuits in the attachment are equivalent.
Given are only the diagramms, I have found a boolean expression for these circuit...
http://www.experts-exchange.com/Other/Math_Science/Q_24845723.html
I would like to find a program that is able to simulate all various kinds of e-circuits, and provide full choice of already constructed standard integrated circuits. It should be able to provide al...
http://www.experts-exchange.com/Hardware/Misc/Q_10082343.html
How can I detect fire whit a hardware (circuit)?
I use a infrarred sensor, but how I use it to detect fire?
If someone know one form to do this, plese tell me?
I will use a 8051 microprocesor.
http://www.experts-exchange.com/Hardware/Misc/Q_10141871.html
I'm facing problem in interfacing between my off hook circuit with DTMF Dialer. If i manually off hook the phone line(pick the phone up), and then send the DTMF signal through microcontroller, the ...
http://www.experts-exchange.com/Hardware/Misc/Q_20084072.html
Zones:
HardwareDate Answered: 02/28/2001 Rating: 9.2 Views: 0
I am setting up a two RH7.3 box network for running MPI parallel programs. I ran some code and it worked... After running the code again i started getting the error "poll: protocol failure in circ...
http://www.experts-exchange.com/Networking/Linux_Networking/Q_20354732.html