I have CME setup on a 2811 with 4 analog voice ports. The phone lines are being installed in a few hours. I do not know if we are going to need to dial a 9 or not. I do not think we will. How d...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21229666...
Hi,
I've set up a call manager express (ver 3.3) and a trixbox (ver 2.2). I can call to the phones on the trixbox from the call manager by using a dial-peer but I have no idea how to call the oth...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_22639979...
Zones:
VoIPDate Answered: 06/18/2007 Grade: B Views: 16
I would like to know how to change all "ephone-dn" already created to "ephone-dn dual-line" in Cisco CallManager Express.
Thanks in advance.
Alejandro.
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_23806910...
Using Epiphany CME 6.5.4
While previewing an email file, following error is received which prevents the preview of the email.
CME WorkerThread_SendCommand HttpQueryInfo - Status Code 401
Non...
http://www.experts-exchange.com/Other/Miscellaneous/Q_21670617.html
Zones:
MiscDate Answered: 12/25/2005 Grade: A Views: 0
I have a 2821.....I've done an "in class" CME install before, about 8 months ago, and i need to make sure that I have the process down....
i've put 12.3(14)T5 on the 2821 ............ IOS
now I h...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21705539...
Zones:
VoIPDate Answered: 01/23/2006 Grade: B Views: 0
Hello Experts:
I am using Multitech GPRS modem. Usually I left my modem connected until and unless I want to shut down my computer. Yesterday While I was going home I just disconnect the connec...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Modems/Q_22491439.html
Zones:
Modems,
GSM,
GPRSDate Answered: 04/29/2007 Grade: A Views: 8
Cisco 2821 Router with CME 4.0; 4 port FXO Card
Call coming in from FXO directed to extension cisco IP phone (any model). While ringing on the Cisco IP Phone and the FXO disconnects before being r...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22603731.html
Zones:
Routers,
VoIPDate Answered: 09/12/2007 Grade: B Views: 31
Hello,
Im having problems getting some cisco IP phones to perform a consultative trasnfer , specifically 7912's the multi button phones seem to work fine, just not the 7912. When i call in fro th...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/IP_PBX/Q_229038...
Zones:
IP PBX,
VoIPDate Answered: 07/23/2008 Grade: B Views: 46
I have a Cisco CME on a 2821 router, it is running CME 4.1, Unity Express 2.3 and IOS 12.4(1)XJ3
I want to upgrade to CME 4.2, UE 3.1.2
Looking for a good document on doing so
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_23342779...
Cisco FXO Disconnect issue, I installed a 2811 router and I have CME and FXO interfaces, the problem is that when the caller from the PSTN hangs the call, the router doesnt recongnize this and the ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22413605.html
Zones:
Routers,
VoIPDate Answered: 08/17/2008 Grade: A Views: 52
