Advertisement

1 - 10 of 249 containing alltags:("cmos") (0 seconds)
when booting up my kids computer .the cmos setup stops and says floppy disk fail (C0).I can't read from the A: . i have swaped out the 3.5 floppy and ribbin ,and it still doesn't work.I've looked ...
Zones: HardwareDate Answered: 08/21/1998 Grade: B Views: 0
Can I use an external CMOS battery on a ABIT PT5 mother board. If so where does it connect
Zones: HardwareDate Answered: 10/26/1998 Grade: C Views: 0
I have an AST Advantage 486DX2 66Mhz computer that has a CMOS password set.  When you boot up the computer it asks for the password before it will let you go further.  Is there a way to get into th...
Zones: HardwareDate Answered: 09/10/1998 Grade: B Views: 0
I have a Pentium 233MMX w/ 64mb of ram.  Recently when I turned the computer on, during boot up I got the follow error msg : "CMOS checksum error - defaults loaded".  After the computer finished bo...
Zones: Hardware, ComponentsDate Answered: 07/25/2000 Grade: A Views: 0
We use pcs running NT4 to control industrial machines and it is important that any pc power management options be disabled. Before shipping a perl script checks the pc configuration.  Is there...
Zones: ProgrammingDate Answered: 02/27/2001 Grade: A Views: 0
How is it that a PC will boot and all devices be accessable even though the CMOS battery is dead? Whenever I've had a dead battery, all I had to do was enter the date and time on each boot, and ...
Zones: HardwareDate Answered: 07/09/2001 Grade: A Views: 0
When a message"CMOS error - Defaults loaded" appears and the changes made through bios setup, date, time are not remeberd  and battery is good : How to fix the problem?  
Zones: HardwareDate Answered: 07/09/2002 Grade: B Views: 0
After the performing the memory count, it displayed "CMOS Checksum error - defauls loaded". I had tried to enter the CMOS and change my date n time settings. Although the changes are reflected,...
Zones: HardwareDate Answered: 07/24/2002 Grade: A Views: 0
Folks, I'm trying to find a device driver for WinNT/2000/XP that will allow me to SAFELY read/write from/to CMOS memory. I'm familiar with the 'giveio' driver which allows port I/O instructions ...
Zones: Windows ProgrammingDate Answered: 08/28/2002 Grade: A Views: 0
will taking out the batteries work or is there something else i need to do?
Zones: HardwareDate Answered: 11/01/2003 Grade: A Views: 0