I have a point to point T1 from the US to the Netherlands.
In the US the T1 is terminated with a Cisco 4000 with an external DSU/CSU Adtran 120 and in the Netherlands it is terminated with a Cisco...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21240992.html
Zones:
RoutersDate Answered: 04/02/2005 Grade: A Views: 4
We have a csu/dsu wan interface card integrated into our cisco 2621 for t-1 service. The al light has been going red and then back to green , causing us to have intermittent problems. Is there a wa...
http://www.experts-exchange.com/Networking/Misc/Q_20832727.html
Zones:
NetworkingDate Answered: 10/31/2004 Grade: A Views: 14
I have never setup an ISP T1 connection before. What I have is one office in Location A and another in location B that the telco ran a T1. I have a test lab setup and connected the two routers lo...
http://www.experts-exchange.com/Networking/Misc/Q_21959329.html
I am wondering if you need a T1 (dsu/csu)card to set up MPLS network. can you jack into MPLS with Ethernet port?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_22965167.html
Greetings,
I'm a bit rusty in dealing with router hardware for an actual T1 circuit. I've been doing so many Cable and DSL installations, I've lost touch.
I have a client with brand new T1 cir...
http://www.experts-exchange.com/Networking/Misc/Q_21955848.html
I'm having problems getting my T1 connection up and could use some advice...
I have the following:
1. Two brand new Cisco 1841's each with a dual port T1 card in slot 1. (not a CSU/DSU combo ca...
http://www.experts-exchange.com/Networking/Network_Management/Q_22985615.html
I have two 2501 Cisco Routers I would like to connect together via their serial cables for learning and testing purposes. Is there a way to connect them without having to use a CSU/DSU? Is there ...
http://www.experts-exchange.com/Networking/Misc/Q_20123251.html
I updated glibc because some new applications would not work with the version of the library that came with my Redhat 7.3. I updated from glibc-2.2.5-34 to glibc-2.3.1-36.
Everything seemed to ...
http://www.experts-exchange.com/Programming/System/Linux/Q_20514908.html
Zones:
Linux DevDate Answered: 02/22/2003 Grade: A Views: 4
I wrote down the entire menu from my Adtran T100. It is a very old unit with no backlit LCD. So it's almost impossible to read.
I was hoping someone coul explain some of the parameters listed ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21442665.html
Zones:
RoutersDate Answered: 06/01/2005 Grade: A Views: 0
Hello all:
I'm new with Cisco routers and I've been given two Cisco 1600s to play with. I recently took a training course where the routers in class had the 60-pin serial connections on the back...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21477161.html
Zones:
RoutersDate Answered: 09/05/2005 Grade: A Views: 0
