Advertisement

1 - 10 of 2710 containing alltags:("dhcp") (0.002 seconds)
We are using windows nt server 4.0 with two scope on DHCP server on different subnets. Problem which we are facing is that our one subnet clients , connected through Digital Vnswitch which can work...
Zones: Windows NT NetworkDate Answered: 09/18/1998 Grade: C Views: 0
I need to tell whether or not a Win95 PC is using DHCP or using a pre-specified IP address.  I have not been able to find any registry entry or file that can reliably tell me (though I am sure that...
Zones: Windows 95Date Answered: 12/14/1998 Grade: C Views: 0
Hardware:  Dell PowerEdge 4200 Server  Single P2-300/128MB RAM Software:  Windows NT Server 4.0 Service Pack 4 Just installed DHCP Service (and reapplied the service pack) and over the same subnet...
Zones: Win NT SetupDate Answered: 02/27/1999 Grade: B Views: 0
I'm attempting to enable WINS resolution over DHCP.  Per Microsoft's instructions, I have configured the DHCP server with node type 8 (h-node) and keyed in the WINS server addresses.  I have checke...
Zones: Windows 9x NetworkingDate Answered: 02/24/1999 Grade: B Views: 0
Are there any known problems with the Warp 4 DHCP client getting (and keeping) an IP address from an NT 4 DHCP server?  If so, what to do?? Background:  The DHCP server (over which I have no contr...
Zones: OS/2 Network SecurityDate Answered: 04/06/1999 Grade: B Views: 0
Can any one tell me why ipconfig/renew takes 3 sec Try this ipconfig /release_all ipconfig /renew_all
Zones: Windows 98Date Answered: 03/16/2002 Grade: A Views: 0
I have an PDC which uses DHCP to assign IP address's. Is there a way in which User A can have a different gateway than User B.Our router routes the internal network using one gateway address, but u...
Zones: Windows NT NetworkDate Answered: 01/10/2000 Grade: C Views: 0
Win95 clients running on IBM 600 laptops, they have Xircom 10/100 carbus ethernet cards. A couple of them do not successfully lease an IP address from the Windows NT DHCP Server. When I go into win...
Zones: Windows 9x NetworkingDate Answered: 01/27/2000 Grade: C Views: 0
we are currently running a NT network (LAN/WAN) using NT 4.0/sp4, we have designated lines to 100 locations using Newbridge equipment, we run TCP/IP..  we have each location using a designated ip, ...
Zones: Windows NTDate Answered: 02/08/2000 Grade: B Views: 0