This is my current system temp
Motherboard ---- 40 "C (104 "F)
CPU -------------- 33 "C (90 "F)
CPU Diode ------- 48 "C (115 "F)
What is the CPU diode temp?
My system
- Athlon XP 2000+ ov...
http://www.experts-exchange.com/Hardware/Misc/Q_21225474.html
Zones:
HardwareDate Answered: 01/08/2005 Grade: A Views: 0
I need to connect 24 diodes to a raid card. The diodes will be in a panel that is attached to the front of the computer. Well the raid controller is in one of the slots of the motherboard. That mea...
http://www.experts-exchange.com/Hardware/Components/Q_22763969.html
We have an electrical switch that lights up when it is on.
The output wire of the switch outputs 12v+ when ON, and connects to GROUND when the switch is OFF
This creates a bit of a problem f...
http://www.experts-exchange.com/Web_Development/Web_Languages-Standards/XML/Q_23097242.htm...
Zones:
XML,
MiscDate Asked: 01/20/2008 Points: 500 Comments: 5
I have a data acquisition board that can measure +/- 10 volts, but will fry at +/- 30 volts. So....
I'm looking for a component or components (like transistors and/or diodes) with these characte...
http://www.experts-exchange.com/Hardware/Misc/Q_20831808.html
Zones:
HardwareDate Answered: 04/20/2004 Grade: A Views: 0
Hi,
I just hurt my Geforce4 graphics card by destroying a smd transistor/diode. Now I want to replace this (smd soldering is no problem for me), but don't have any information. Especially I dest...
http://www.experts-exchange.com/Hardware/Desktops/Q_20995486.html
There's a video of some guy supposedly turning his mini-mag flashlight into a laser gun - the link is here
http://www.neenja.com/videos/33/how_to_make_a_mini_death_laser
Is this just a viral ...
http://www.experts-exchange.com/Other/Math_Science/Q_22790949.html
Ok I have a mother board from a shuffle board that has a burned out diode.
I don't know what diode it was it was totaly burned out.
the board is five years old, no replacements that I could...
http://www.experts-exchange.com/Hardware/Components/CPU_Processors/Q_21645380.html
My TV is broken, two avalanche diodes are broken, 1n5062.
The TV is a normal (not widescreen, not flatscreen) Philips TV of 55cm (22 inch).
Now it seems the diodes are connected as in a bridge ...
http://www.experts-exchange.com/Hardware/Misc/Q_22003619.html
Zones:
HardwareDate Answered: 10/11/2006 Grade: B Views: 0
I have built a circuit that uses a hand wound 1:1 isolation transformer (100 turns to 100 turns) and I am trying to convert it's secondary output from 3VAC (should be 50Hz) to DC using a bridge mad...
http://www.experts-exchange.com/Hardware/Components/Q_23405240.html
Does anyone have a good example of creating an ActiveX LED (Round, Light Emitting Diode). VB6!
Thanks
Brad
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/Q_12005599.html
