Advertisement

1 - 7 of 7 containing alltags:("dmesg") (0 seconds)
My PC at work is rebooting in the middle of the night. Is there a utility that logs boot time so I can find out when this happens? Or is a log kept somewhere?
Zones: Windows XPDate Answered: 11/11/2005 Grade: A Views: 0
I dont' know if I am getting it right, but I have understood that the dmesg kernel messages are stored in /var/log/messages by the help of syslog, and that syslog was adding a timestamp before each...
Zones: Kernel Programming, Linux, Linux AdminDate Answered: 10/27/2007 Grade: A Views: 113
I have configured stripping raid of 2x120gb hdd's using controllers bios which is accessed while booting... But linux sees em as two seperated hdd's.... --- cut from dmesg --- HPT370: ID...
Zones: Linux, Linux DistributionsDate Answered: 01/22/2004 Grade: C Views: 0
I have a Linksys WPC11 ver.3 pcmcia card. When I installed Slackware 9.0, it detected the card, loaded the orinoco/hermes drivers, grabed an IP address, and it was good. Not liking the orinoco driv...
Zones: Linux Net, WLANDate Answered: 03/20/2005 Grade: A Views: 0
dmesg used to work on this system, but today when I run dmesg, it just displays the date and hangs. I can read /var/adm/messages and /var/log/syslog perfectly fine. This server runs Solaris 8. Toda...
Zones: Solaris, UnixDate Asked: 09/04/2008 Points: 500 Comments: 4
I was supposed to give a class presentation and we tried to hook my computer  into the 15 pin female joint (sorry I forget what it is called three rows of 5 pins on the computer, hooking to 15 pi...
Zones: Projectors, Free BSDDate Answered: 04/02/2008 Grade: A Views: 35
We have a 5 TB  SCSI hotplug disk that's configured as hardware RAID 5.   From ESX GUI,  could see 4.6TB usable space (ie nett after RAID 5).   After installing Linux OS, we could see 2TB moun...
Zones: Linux, VMwareDate Answered: 07/08/2008 Grade: A Views: 43
  • 1