I HAVE A PENTUIM 233 MMX WITH 32 MEG OF SDRAM THAT WILL STOP ON THE ERROR BUILDING DMI POOL . AND THE CURSOR STOPS HERE. I HAVE RESEATED CPU CHIP, RAM CHIP, CLEARED THE CMOS AND SET TO DEFAULT, AL...
http://www.experts-exchange.com/Hardware/Misc/Q_10135875.html
Zones:
HardwareDate Answered: 07/01/1999 Rating: 6.8 Views: 0
i would like to see better performance from this computer
it is about as fast as my win98 computer with one 800 mhz processor.
here is a report i got
<< Mainboard Information >>>
-------------...
http://www.experts-exchange.com/Hardware/Misc/Q_20184497.html
Hi Folks,
I'mk looking for a way to extract the Serial Number from various hardware (COMPAQ, DELL, IBM) stored in the DMI with DOS or similar boot disk, I'm assuming that there is a small applicat...
http://www.experts-exchange.com/Hardware/Misc/Q_20952288.html
Zones:
HardwareDate Answered: 10/28/2004 Rating: 7.2 Views: 0
I have a Pent II 266 / 64megs RAM... I put '95 on my system
and went to put NT 4.0 on also. During the NT install it
needed to reboot to complete the installation (NT said it would disable my curr...
http://www.experts-exchange.com/Hardware/Misc/Q_10035947.html
Zones:
HardwareDate Answered: 02/21/1998 Rating: 5.4 Views: 0
How can I start windows 95, when I get the message "verfifying Pool Data?No rescue disk or backup.
rgds
Michael
http://www.experts-exchange.com/Hardware/Misc/Q_10050061.html
Zones:
HardwareDate Answered: 05/24/1998 Rating: 6.8 Views: 0
Tried to install an Iwill 2935UW SCSI adaptor. System hangs on "Ch...". Tried all four PCI slots, tried changing Award 4.51 BIOS settings concerning hardware interrupts.
What is the DMI data po...
http://www.experts-exchange.com/Hardware/Misc/Q_10086938.html
Zones:
HardwareDate Answered: 10/19/1998 Rating: 6.4 Views: 0
HOw do i boot if my computer keeps halting at a verifying dmi data pool messege.... rememeber i cannot boot from disk or hard drive.... i reset the bios and it dont work eighter...
http://www.experts-exchange.com/Hardware/Misc/Q_10149041.html
Zones:
HardwareDate Answered: 07/07/1999 Rating: 5.8 Views: 0
I am trying to upgrade a machine to a 166 Pentium, and everything seems to go well. Except it starts beeping and the screen turns off and on once it gets to the "verifying dmi pool" stage of the bo...
http://www.experts-exchange.com/Hardware/Misc/Q_10239380.html
Zones:
HardwareDate Answered: 11/28/1999 Rating: 7.4 Views: 0
When I am booting up I get an error message saying:
Failed to Launch: Intel LANDesk Client Manager
How do I eliminate this?
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/98/Q_11651098.html
Zones:
Windows 98Date Answered: 10/25/2000 Rating: 8.4 Views: 0
im in a subnet, in it we have two routers, one connects to a rdis (128) and the other to frame relay.
i have three hubs cascade(all are unmanaged).
my server as solaris whith informix aplication...
http://www.experts-exchange.com/Networking/Misc/Q_20152748.html
Zones:
Networking,
...Date Answered: 07/23/2001 Rating: 4.4 Views: 0
