Here's the puzzle peice I am trying to solve:
when I have text in a file like this:
policy-map UNTRUSTED_INTERFACE
class VOICE
set dscp ef
set fox run
class VIDEO
set dscp af4...
http://www.experts-exchange.com/Programming/Languages/.NET/Visual_Basic.NET/Q_22453395.htm...
OK I had a question posted similar to this before and I thought I had what I needed but maybe not. So here is what I have:
Site1
1 - 3560
1 - 4507R
1 - 3845
Site2
1 - 3560
1 - 2811
...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22840997.html
Zones:
Routers,
VoIPDate Answered: 09/21/2007 Grade: A Views: 0
I need to set the DSCP to be express forward for all traffic from one particular ip address on the ethernet network of a router...
Can anyone offer advice on this?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21938309.html
Zones:
RoutersDate Answered: 09/04/2006 Grade: A Views: 8
We are going to add second T1 line to our 2620xm router.How do i configure to utilize all bandwidth of a new T1 line to our
database server ONLY.Here is the current config of the router:
OPS#s...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21528907.html
Zones:
RoutersDate Answered: 10/14/2005 Grade: A Views: 0
I have a WAN configured in a hub-and-spoke design.
The "hub" is my datacenter and there are three 2650's there each of which have two point-to-point T1s that connect each 2650 to one of three br...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22852823.html
Zones:
Routers,
VoIPDate Answered: 09/26/2007 Grade: A Views: 0
Hello Experts,
I'm getting ready to roll out some routers and wanted to get an experts opinion that I have the QoS for the dscp 46 set up correctly. Any help would be great.
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23144189.html
Zones:
RoutersDate Answered: 02/07/2008 Grade: A Views: 4
I have to apply QOS to a 2940 and 3800 that is carrying encrypted VoIP over an IPSec tunnel. How can I do this is the tags / header can't be read? The 3800 to 2940 requires a marking of COS for the...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_22943349...
Zones:
VoIP,
Routers,
VPNDate Asked: 11/06/2007 Points: 500 Comments: 3
We're having some issues with VoIP quality at many sites. We've tried ajusting out configurations but and it seems to have helped a little but we're still having quality issues (the remote site can...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_22956922...
Zones:
VoIP,
RoutersDate Asked: 11/13/2007 Points: 500 Comments: 7
Hi there,
I need a bit of help and advice. I have a Netgear FSM7352S Layer 3 Switch, configured with multiple VLANs, providing basic Internet access to units (30+) in a business centre. I nee...
http://www.experts-exchange.com/Networking/Network_Management/Q_23907904.html
I'm trying to set up some QoS over a point-to-point link which uses a T1.
I've been reading a lot of examples, but I'm not sure what the "best way" for me to handle it is in this situation.
...
http://www.experts-exchange.com/Networking/Misc/Q_23172273.html
