I installed a new EISA PRO/100 NIC (supports 10 base and 100base)into a 3.12 netware server, the server still runs at 10base rather then the 100 base. Is there something I need to change in the EI...
http://www.experts-exchange.com/Networking/Novell_Netware/Q_10052207.html
Zones:
NetwareDate Answered: 06/01/1998 Rating: 6.4 Views: 0
I have an EISA motherboard with a 468DX2-50 which I believe to be a Micronics. The model number is 09-00030-51 Rev D and the S/N is 10081527.
I have been to the Micronics site ftp://ftp.microni...
http://www.experts-exchange.com/Hardware/Misc/Q_10218807.html
The machine is a Vectra 486/66 ST, Sept 93. It has an EISA motherboard with an Adaptec 1740 EISA Fast SCSI
controller.
The problem is that we need to run the EISA configuration utility in order...
http://www.experts-exchange.com/Hardware/Misc/Q_20276382.html
I'm trying to add the eisa partition from disk1 to the system drive (disk0) and have no clue what to do. I've tried all i know how to....any ideas???? much appreciated....
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/2000/Q_20604043.htm...
Zones:
Windows 2000Date Answered: 06/16/2003 Rating: 8.0 Views: 0
Hi
I am using dell power Edge system for my windows 2000 server
I got two SCSI HDD mirrored with EISA utility
One day my system crashed and i repaired with emergency repair disk
After repai...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/2000/Q_21008904.htm...
Zones:
Windows 2000Date Answered: 11/01/2004 Rating: 7.6 Views: 0
the compaq 800 and ml350 machines have a 39 mb utility partition used by compaq. whenever you build this machine, the 39 mb partition is present.
two part question - is it absolutely needed and...
http://www.experts-exchange.com/Storage/Misc/Q_21243821.html
I have a 60GB disk from a dead HP Win2K machine. The disk <had> an HP 4.8GB EISA Configuration OEM partition and a main partition of 55.2GB. I put it into a WinXP Pro box.
I used DiskPart overr...
http://www.experts-exchange.com/Storage/Misc/Q_21648233.html
Hi
I have a dell poweredge 4400, I have added a new drive to mirror the boot/system drive and the boot ini file needs to be changed.I have tried and have had no success. The only problem i can see...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/2000/Q_20798009.htm...
Zones:
Windows 2000Date Answered: 05/29/2004 Rating: 7.6 Views: 0
I am about to install some encrpytion software on a standalone WIn2K SP4 PC, but I can't do this until the EISA partition is deleted. The PC is a Dell Dimension 8300 and this partition makes up the...
http://www.experts-exchange.com/Operating_Systems/Win2000/Q_21025751.html
Zones:
Windows 2000Date Answered: 06/17/2004 Rating: 8.6 Views: 113
Dear all,
I reacently had to migrate a 2000 domain controller from a Dell to an HP ML350 G3 server. I managed to accomplish this by using a PCI SCSI card, transferring the disk set (with the car...
http://www.experts-exchange.com/Storage/Misc/Q_21657279.html
