Enter Keywords:
Search Within Results
 
 
Narrow Results
Can't Find a Solution
 
 
 
1 - 10 of 56(0.013 seconds)
Sort By:
 
I have lost my /opt (ie I can not fsck it) because it is encapsulated into volume manager. And volume manager is sitting in the /opt, which means that volume manager is unavailable because, it's si...
Zones: Solaris UnixDate Answered: 03/15/2003 Rating: 7.0 Views: 0
Today my Linux Box started a fsck automaticlly during boot. Suddenly it sttoped with error: Error reading block 13565971 (Attempt to read block from filesystem resulted in short read) while doi...
Zones: Linux NetDate Answered: 04/27/2004 Rating: 8.8 Views: 4
After a power failure our sun machine doesn't come up at all. It checks the root partition and fails telling to run it manually. It prompts for root password. Type it in but you never get a prom...
Zones: Solaris UnixDate Answered: 04/20/2002 Rating: 6.0 Views: 0
I just installed solaris 8 on a 420r and everything seemed to go well but now i am getting the following error: WARNING: /pci@1f,4000/scsi@3/sd@1,0 (sd1):         corrupt label - wrong magic nu...
Zones: Solaris Unix, Sun JDSDate Answered: 02/14/2004 Rating: 7.4 Views: 0
# fsck /dev/rdsk/c0t0d0s6 ** /dev/rdsk/c0t0d0s6 ** Currently Mounted on /opt ** Phase 1 - Check Blocks and Sizes INCORRECT BLOCK COUNT I=225803 (2 should be 0) CORRECT? y WARNING: /pci@1f,0...
Zones: Solaris UnixDate Answered: 01/21/2003 Rating: 5.4 Views: 0
I have a slackware Linux box in the closet (no monitor attached) that I telnet into when its on.  Sometimes when I boot up, it has a filesystem error and sits at the "enter root password for mainte...
Zones: Linux SetupDate Answered: 06/09/2003 Rating: 9.4 Views: 0
From: format -> partition -> print Part      Tag    Flag     Cylinders        Size            Blocks   0       root    wm     223 -  722        1.12GB    (500/0/0)   2356000   1       swap    ...
Zones: Solaris UnixDate Answered: 09/24/2003 Rating: 8.6 Views: 0
My /var/spool partition will not mount due to inconsistencies in the file system.  I’ve ran FSCK with no luck.  FSCK -p says it doesn't have write access to the drive.  I can mount the partition re...
Zones: Free BSDDate Answered: 03/28/2004 Rating: 9.2 Views: 0
I would like to allow my users to run fsck after power loss without giving them the root password. When the system is improperly shutdown and boots into single-user mode, the user is asked for the ...
Zones: Linux AdminDate Answered: 04/03/2006 Rating: 8.8 Views: 0
hi, I have Linux 5 Ent. on HP server. while booting this server says : file system check failed. And given option for maintenance mode. After enter root password i tried fsck to repair the FS. But...
Zones: Linux Admin, Linux SetupDate Answered: 11/08/2007 Rating: 8.0 Views: 0