Hi
would gprs be a suitable means of connecting a LAn to the internet?
I am investigating possibilities for some of our remote clients where the only available means of communication is the cel...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20488955.html
Zones:
GPRSDate Answered: 11/21/2003 Rating: 8.0 Views: 0
Hi,
I happened a problem when i have been connectted the gprs network, then i begin to create the ppp link, but when I recived the ipcp's config request packet,then I Reject it,and config the ip...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20528570.html
Zones:
GPRSDate Answered: 04/08/2003 Rating: 7.2 Views: 0
Dear Friends
Could you please tell me about the following commands which have been used in cisco 2600 series for GPRS ATM? what it will do?
chat-script gprs "" AT OK AT+CGDCONT=1,"IP","TTLg...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20580675.html
Zones:
GPRSDate Answered: 04/29/2003 Rating: 7.8 Views: 4
Hello there,
I am new to GPRS and I am finding it hard to find enough information to get started properly. I have scanned quickly documentation for different GPRS modems and that doesn't seem ba...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20596716.html
Zones:
GPRSDate Answered: 05/08/2003 Rating: 7.0 Views: 0
Hi People,
I´m developing and app. (hardware) that is supposed to transmitt data using GPRS to a PC connected to the internet.
1) I know that I have to stablish a PPP connection to my server,...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20623086.html
Zones:
GPRSDate Answered: 05/22/2003 Rating: 7.2 Views: 0
Hi!
I am developing a software (using C++Builder5) for system which consist of data center (fixed IP address) and sensors which will send telemetrical data. The idea is to send an SMS to acti...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20623633.html
Zones:
GPRSDate Answered: 05/26/2004 Rating: 6.0 Views: 0
(!!!Important)"AT"+"GPRS"==>"Internet" Only...
Dear All.
I'm interested in accessing internet from my microcontroller, or from a dumb Serial Editor (e.g. Hyperterminal) that means, I should use...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20640236.html
Zones:
GPRSDate Answered: 05/26/2004 Rating: 5.8 Views: 0
Can anyone help.
I am currently trying to connect 2 gprs modems over the air. My test set up is as follows.
2 pc's using hyperterminal with 2 gprs modems connected.
My problems start when I ...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20791012.html
Zones:
GPRSDate Answered: 05/26/2004 Rating: 7.6 Views: 0
Hello, I'm a portuguese student!!
I'm to try use GPRS connections in mobile phones with JAVA, for serie60 of Nokia.
But I'm a little lost.
I don't know how I test my applications, to see if is w...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20801410.html
Zones:
GPRSDate Answered: 11/19/2003 Rating: 7.0 Views: 0
Hi all,
I need to connect 2 uC's and both are connected via RS232 to an Enfora Spider SA-G modem. The uC's don't have any PPP stack. I just need to send plain ASCII information from on uC to ano...
http://www.experts-exchange.com/Networking/Wireless/Standards/GPRS/Q_20884485.html
Zones:
GPRSDate Answered: 05/24/2004 Rating: 6.6 Views: 0
