has any1 had any success in removing the boxed CPU heatsink from a pentium MMX class CPU?? and how did u do it??
http://www.experts-exchange.com/Hardware/Misc/Q_10096778.html
Zones:
HardwareDate Answered: 12/20/1998 Grade: C Views: 0
I have an old athlon Tbred-A 2200 233 FSB and a stock AMD heatsink for socket 462. This computer was salvaged from the trash. It boots to windows OK but reboots after some time. The idle temps ...
http://www.experts-exchange.com/Hardware/Misc/Q_21557135.html
I am in the process of constructing a waterblock from an older heatsink. I plan to glue plastic using silicone to the sides and top of the heatsink, and also install some tubing which will act as i...
http://www.experts-exchange.com/Other/Miscellaneous/Q_21669940.html
Zones:
MiscDate Answered: 12/27/2005 Grade: A Views: 0
CPU fan sounds like a jet engine... LOUD. I built a chasis 1550 (intel) and the 5000pal board with a intel 3.2 ghz 5060 cpu. Built it from scratch and got it up first time. Only issue is the dar...
http://www.experts-exchange.com/Hardware/Components/Fans_Cooling/Q_22660345.html
What is the Ball Bearing different from other Fan/Heatsinks?
http://www.experts-exchange.com/Hardware/Misc/Q_10073001.html
Hi,
I want to change my heatsink fan on top of the CPU.
My situation is as follows:
Over the past while, my OS (Windows 2000) has randomly rebooted, i dont know why because i am never there ...
http://www.experts-exchange.com/Hardware/Desktops/Q_20865273.html
Hello.
I recently upgraded processors from a p4 2.0 to a p4 2.8. Anyways everything was working and then
all of a sudden i turned the comp on and it sounds like it starts and boots however there ...
http://www.experts-exchange.com/Hardware/Components/CPU_Processors/Q_21613444.html
Noticed my system was locking up so
I removed the case. The CPU fan was
off of the CPU due to a damaged clip
holder on the mother board beneath
the cpu socket. I can not secure
the fan\heats...
http://www.experts-exchange.com/Hardware/Misc/Q_10564061.html
I've got an AMD Athlon 1400 running of and ECS K7S5A board. I'm running Motherboard Monitor 5 to monitor the temperatures of my CPU and system board. The system board is usually around 32 degrees ...
http://www.experts-exchange.com/Hardware/Misc/Q_20234129.html
Since the manual that my celeron came with had some pretty bad instructions, I did what I could.
Everything is working fine, but I want to clarify that I installed it correctly.
First I hooke...
http://www.experts-exchange.com/Hardware/Misc/Q_20453356.html
