Advertisement

1 - 10 of 138 containing alltags:("iSCSI") (0.001 seconds)
We are just switching over to a large Snap server which has been set up as an iSCSI drive connected to an HP DL360G5. One of the NIC's on the Proliant connects to the iSCSI drive via a private VLAN...
Zones: Storage TechnologyDate Answered: 05/02/2007 Grade: A Views: 0
Hi, I would like to know if ISCSI only supports NAS or it also supports SAN? Does anyone know if dell cx products support ISCSI?
Zones: Drives / Storage, Tiv...Date Answered: 03/14/2004 Grade: A Views: 0
Hi,    What is difference between NAS & iSCSI or comparison of NAS & iSCSI, which gives better performance with respect to sned,access data and manageability. Regards DArshan
Zones: Drives / StorageDate Answered: 06/10/2005 Grade: A Views: 0
Hello, I am in need of disk storage for a backup system. We need a minimum of 2.5 TB of storage and ideally 4+TB. It does not need to be fast but does need RAID5 protection. The array can be ...
Zones: Drives / Storage, Tiv...Date Answered: 08/29/2005 Grade: B Views: 0
Hi,  I am a beginner in stroage and wish to get some basic knowledge about storage , which will help me to get depth knowledge. Waiting for positive reply Regards sunil
Zones: Drives / Storage, Tiv...Date Answered: 01/28/2006 Grade: A Views: 0
Hi   I would like to setup an ISCSI target and initiator in my two linux machines. Is there a howto guide? I've read the ardistech project but could not get my target server running. An error in...
Zones: Drives / StorageDate Answered: 05/01/2006 Grade: A Views: 52
We have an existing system (Windows NT 4.0 Server) that we need to tranfer to a bootable iSCSI target. The initiator machine has an Adaptec 7211 HBA, so I know it supports booting from iSCSI. The t...
Zones: Drives / StorageDate Answered: 04/20/2006 Grade: A Views: 0
Hello, I am using Novell Netware 6.5 server to connect to an iSCSI target, the iSCSI target is Sanrad's VSwitch 3800 (http://www.sanrad.com), it's an hardware iSCSI gateway. Anyway when i connect ...
Zones: Storage Technology, Netware, Drives...Date Answered: 09/24/2007 Grade: A Views: 4
I plan to move from Exchange 2k3 to Exchange 2k7.  I just found 2k7 has a cool cluster feature called CCR.  It does sound very interesting.  What I have in my 2k3 environment is: - Ex2k3 enterpr...
Zones: ExchangeDate Answered: 06/12/2007 Grade: A Views: 4
Were currently running a single SQL server off an HP AIO SAN.  During backup and other application tasks it routinely pushes the 1 Gb pipe to 90%.  This would not be an issue except that we plan t...
Zones: Storage Technology, Switches / Hubs, Serve...Date Answered: 07/09/2007 Grade: B Views: 0