please note will increase point when i have more
I have a motherboard here which brand it is i dont know i will post all the information on it i can
award bios s/n: 022583594
made in taiwan (duh...
http://www.experts-exchange.com/Hardware/Misc/Q_10036028.html
Zones:
HardwareDate Answered: 02/10/1998 Rating: 5.8 Views: 0
I am in the process of upgrading from a Pentium 75 MHz to a Pentium 166 MHz cpu. After installing the new cpu and setting the motherboard jumper settings to 2.5 V at 66 MHz, I tried ti fire up the ...
http://www.experts-exchange.com/Hardware/Misc/Q_10111868.html
Zones:
HardwareDate Answered: 12/27/1998 Rating: 7.4 Views: 0
On the top of the SCSI CD-ROM it says, about the jumper that controls termination, "Terminated short-off". In my mind this means that the jumper should be left open to terminate, now this makes me ...
http://www.experts-exchange.com/Hardware/Misc/Q_10210064.html
Zones:
HardwareDate Answered: 09/26/1999 Rating: 6.8 Views: 0
I have an amd xp+1800 and A M7vib-a version 2.2 motherboard. It runs fine at 100mhz fsb. But when I set the jumpers to the default 133mhz fsb. I get major errors and lockups.It has 300 watt power s...
http://www.experts-exchange.com/Hardware/Desktops/Q_20367457.html
Whare are the correct jumper settings for this motherboard and cpu?
http://www.experts-exchange.com/Hardware/Misc/Q_20443950.html
Zones:
HardwareDate Answered: 11/05/2003 Rating: 7.6 Views: 0
Hi, I can't detect my hard drive which i use for my data. i have much data inside it.
I was trying to autodetect through BIOS, but it's not detected. I've tried to my friend's computer, the resul...
http://www.experts-exchange.com/Hardware/Misc/Q_20476822.html
Zones:
HardwareDate Answered: 11/01/2003 Rating: 8.0 Views: 0
Hi!
What is this extra Hard Disk pin used for? It can be found on almost every HD, but is not referenced in jumper settings. I suppose it's used to hold unused jumpers, but i'm not sure. Is it?
...
http://www.experts-exchange.com/Hardware/Misc/Q_20887440.html
Zones:
HardwareDate Answered: 02/17/2004 Rating: 8.4 Views: 0
I have already read a previous post on this site regarding a similar situation with "mraible" http://www.expertsexchange.com/Operating_Systems/WinXP/Q_20677299.html But I couldn't solve the proble...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_21416782.html
Zones:
Windows XPDate Answered: 06/11/2005 Rating: 5.8 Views: 0
I've looked at a few questions around this subject...
Suddenly, when trying to fit a 10 GB hard disk to a fairly old MMX 166 (which actually runs on a 2 GB HD W98) Fdisk tells me the new (second h...
http://www.experts-exchange.com/Hardware/Misc/Q_21478688.html
Zones:
HardwareDate Answered: 07/06/2005 Rating: 6.2 Views: 0
hi,
i just bought a Comp-usa External casing for an ide hard drive. it is connected to my computer by a USB connection.
There were no instructions on what the encased hard drive is suppose to be ...
http://www.experts-exchange.com/Storage/Misc/Q_21680069.html
