Is it possible to mount a network drive?
I have two windows 98 machines and one linux machine. I would like to mount the hard drive from one of the windows machine while I'm in linux. Is this po...
http://www.experts-exchange.com/Networking/Linux_Networking/Q_20153256.html
Zones:
Linux NetDate Answered: 07/20/2001 Rating: 7.6 Views: 0
hi, ok, i am getting really frustrated trying to get my windows machine to see my Linux shares. I can see the shared icon in network neiborhood, but when i try to go to it I get a network path not...
http://www.experts-exchange.com/Networking/Linux_Networking/Q_20516015.html
Zones:
Linux NetDate Answered: 03/01/2004 Rating: 7.6 Views: 0
I have a script which calls ipup to bring up my network card. I placed this script in the rc3.d directory, and called it S30network. The problem is that during boot up, the script gets executed b...
http://www.experts-exchange.com/OS/Linux/Setup/Q_20906443.html
Zones:
Linux SetupDate Answered: 03/03/2004 Rating: 9.2 Views: 0
I'm going to rebuild my Linux machine. At the moment with the current set up I have only one network card, connected to the rest of my network and an adsl modem through the one switch. As there a...
http://www.experts-exchange.com/Networking/Misc/Q_21104598.html
Hello Experts ,
i wanna ask about ports and states..
when i used nmap or any port scanning i can see the state of the ports if the port is open or closed or filtered and unfiltered ...
n...
http://www.experts-exchange.com/Networking/Linux_Networking/Q_23118478.html
Hello Experts ,
as you know the port scanning such as nmap , imap and netcat could used to be scan the ports and states for many different methods ,
Do you know how can i protect my network...
http://www.experts-exchange.com/Networking/Linux_Networking/Q_23119150.html
Hi guys,
I just installed bind for my CentOS box:
yum install bind
Everything went fine.
I created /etc/named.conf file and added below to the named.conf:
----------------------------...
http://www.experts-exchange.com/OS/Linux/Q_23260193.html
I have 2 Linksys WRT54GL routers on my network. I need to know how to set them up so that I can experiment with one of them using OpenWRT without affecting the reliability of the other one.
Cu...
http://www.experts-exchange.com/Networking/Linux_Networking/Q_23574185.html
I Installed iMedialinux : http://www.imedialinux.com/latest_news/new_imedia_linux_6_0_4_has_been_released
On my machine successfully, I setup the Main IP Address On My Machine during installation ...
http://www.experts-exchange.com/Networking/Linux_Networking/Q_23719035.html
Zones:
Linux NetDate Answered: 09/16/2008 Rating: 5.7 Views: 0
I have Two Machines Installed By Ubuntu 8.04 LTS Server Edition, I need to Connect this (2) machines by VPN SW (LGPL) to each other , Please Note That the machines are not connected into the intern...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23738216.htm...
Zones:
VPN,
Ubuntu,
LinuxDate Answered: 09/24/2008 Rating: 6.7 Views: 0
