using a MegaRAID adapter card and two serial drives, but had been using only one of them. shut system down and connected second, entered the MegaRAID configuration menu (ctrl-M) at bootup and may ...
http://www.experts-exchange.com/Storage/Misc/Q_21011253.html
I am having a problem adding RAID controllers to a HP NetServer LH Pro server. I have all the documentations from HP's site and can not find the correct troubleshooting guide for this problem.
http://www.experts-exchange.com/Hardware/Desktops/Q_21334792.html
I am currently having problems installing Red Hat Advanced Server 2.1 that is using an LSI megaraid 150-6.
I have found the drivers, but I am unable to install them. The raid is not hooked up to...
http://www.experts-exchange.com/OS/Linux/Setup/Q_21456349.html
Zones:
Linux SetupDate Answered: 01/24/2006 Rating: 9.0 Views: 0
The card is same as Dell PowerEdge Expandable RAID Controller 3.
The original has 16MB parity 72pin SIMM.
I want to change a 32MB non-partity SIMM, but the card stoped at scan hard disk. (tried o...
http://www.experts-exchange.com/Storage/Misc/Q_21944709.html
I have 2 Dell PowerEdge 6450's with 4 18gb SCSI drives(RAID 5) 1gb or ram, and 4 Pentium III 700MHZ processors. I want to keep using them but Red Hat dropped support for the PERC 2 raid controller ...
http://www.experts-exchange.com/OS/Linux/Q_22102358.html
Hey people.
I desperately need to get my external lsi megaraid 6x 72GB Raid back online.
The power supply blew, yet we have got power pumping find back into it.
The boot up screen says the...
http://www.experts-exchange.com/Storage/Storage_Technology/Q_22532214.html
I've installed the controller on a Gateway ALR 7210 server with 4 SCSI HDD. The bios configuration for the controller works fine (ctrl+m). Here I was able to configure the drives for RAID 5 along w...
http://www.experts-exchange.com/Storage/Misc/Q_20939860.html
I had a drive failure on our Gateway 960 server. I reinstalled a new drive with the same model number as the failed drive. In the MegaRaid BIOS config utility, when I try to rebuild the drive it ...
http://www.experts-exchange.com/Storage/Misc/Q_24904262.html
I'm attempting to Install RedHat 9 on a motherboard with a MegaRAID IDE Controller (AMI® MG80649 IDE RAID). I'm using 4 40 Gig Western Digital Drives setup in a RAID 10 configuration. I've had Wi...
http://www.experts-exchange.com/OS/Linux/Setup/Q_20751164.html
Zones:
Linux SetupDate Answered: 05/06/2004 Rating: 8.4 Views: 0
Hi,
We built a server to run VMWare ESX server. On the VMWare web site it sais that if the driver for your hardware isn't available, you can compile your own from linux drivers available from v...
http://www.experts-exchange.com/OS/Miscellaneous/Q_21597962.html
Zones:
Misc OS,
L...Date Answered: 02/03/2006 Rating: 7.8 Views: 0
