Advertisement

1 - 10 of 331 containing alltags:("mixed") (0.001 seconds)
I have just purchased an FIC PA-2011 motherboard, which has 4 SIMM sockets abd 2 DIMM sockets, in order to have a board which will support my new Cyrix MII 300 CPU.  I was assured that this board a...
Zones: Hardware, RAMDate Answered: 11/04/1999 Grade: A Views: 0
Can I mix SDRAM 66 MHz chips and SDRAM 100 MHz chip in one memory bank? I am going to increase memory in my PC, and 100 MHz SDRAM is 2 times cheaper than older 66 MHz SDRAM chips.
Zones: Hardware, RAMDate Answered: 06/30/2000 Grade: B Views: 0
i have javascript to change location: <% if param = 1 then      response.write "<script>document.location.href="index.asp"</script>" end if 'rest of th asp code bla bla bla %> the probl...
Zones: ASPDate Answered: 02/11/2003 Grade: A Views: 0
I have just recently bought two sticks of PC 2700 DDR Samsung 256 MB Memory. My Asus a7m-266 worked on a pc 2100 256 mb stick. So i removed this because i didnt want to mix memory speeds. My mother...
Zones: Hardware, RAM, ComponentsDate Answered: 01/26/2004 Grade: B Views: 0
Here is the tag-along points for an already answered question. link below. http://www.experts-exchange.com/Networking/Macintosh_Networking/Q_21125807.html
Zones: Apple Networking, AppletalkDate Answered: 09/14/2004 Grade: A Views: 0
Hi there, I have taken over administering an Exchange 5.5 Server.  The Exchange 5.5 Server SP3 is loaded on a Win 2000 Server.  The server is running in mixed mode.  A NT server used to house the ...
Zones: ExchangeDate Answered: 12/20/2005 Grade: A Views: 0
Hi. How can I do the following task programatically? (i.e. selecting "wave out mix" as the recording source for a sound card) Manually: Double click on the speaker icon on the task tray In...
Zones: .NETDate Answered: 03/25/2006 Grade: A Views: 0
I have a portait document, there is one landscape pahe, can I mix them?
Zones: MS WordDate Answered: 09/05/2006 Grade: A Views: 0
Is it possible to use C# code in VB.Net without converting the code to VB.Net?  For example I would like to use a C# binarytrie structure without convert it to VB.Net.  Is this possible? Thank y...
Zones: MS Visual BasicDate Answered: 11/20/2006 Grade: A Views: 0
Hi experts, I have a large Visual C++.NET 2003 managed code project, which is based on the .NET framework 1.1. Since I would like to use some features which are available just under the 2.0 framew...
Zones: MS Visual C++Date Answered: 12/13/2006 Grade: B Views: 0