Advertisement

1 - 10 of 29 containing alltags:("ml150") (0 seconds)
I have a HP ML150 G2 X2.8/800 - is there any way to tell how much L2 cache it has without rebooting and looking in the CMOS? I cannot see any indication of L2 cache in the System Information access...
Zones: HardwareDate Answered: 04/10/2007 Grade: A Views: 0
Hi, I have an urgent problem, On Saturday morning my server (HP - ML150 G2 - 2 weeks outside of warranty) had restarted and would not boot in to windows (SBS 2003). I looked closely at the...
Zones: Drives / StorageDate Answered: 06/29/2006 Grade: A Views: 0
Hi Sorry but being used to Dell kit I have little experience of HP servers. I am sure that if I read the friendly HP manual I would find the answer for myself. Unfortunately, I am worried that th...
Zones: Servers, SBS Small Business ServerDate Answered: 03/01/2008 Grade: C Views: 73
Hi all Probably an easy answer to this but my hardware knowledge is fairly limited.  I have a brand new HP ML150 server which came with a SATA card inside (PCI), and wired up so the SATA drives ...
Zones: Servers, Drives / Storage, Hard DrivesDate Answered: 11/08/2007 Grade: A Views: 10
Hi, I have a HP ML150 server with a 120GB SATA hard drive. I have ordered an additional 120GB because I would like RAID1. Can I build the server with Operating system etc, then add the second ...
Zones: Drives / Storage, Hard DrivesDate Answered: 12/27/2007 Grade: A Views: 8
Hi there, I have an HP ML150 Proliant server running Windows 2003 SBS. This is my disaster recovery server and is only turned on if needed or for testing. I am attempting to restore data to my s...
Zones: Servers, Windows 2003 Server, Storage T...Date Answered: 06/06/2008 Grade: B Views: 69
I have HP PROLIANT ML150 G2 with Adaptec SATA RAID 2610SA Controller startup show BIOSV4.2-1 (build 7368) I have 2 80GB disks which the Array Utilility recognize. I want to install Windows 2003...
Zones: HardwareDate Answered: 05/12/2006 Grade: A Views: 4
Hello all, Question's in the title - we've just taken delivery of an ML150 new release (G3), and I can't find anything saying what sort of memory is compatible beyond the breif mention on the in...
Zones: HardwareDate Answered: 08/22/2006 Grade: A Views: 0
OK, I have a HP ML150 G2 with 2 x 36GB Hard Drives. It came from HP with 1 x 36GB Hard Drive with SBS2003 preinstalled onto a 17GB partition. At the time I didn't want to reinstall SBS from scrat...
Zones: Drives / StorageDate Answered: 06/09/2007 Grade: A Views: 8
I am trying to setup an old server HP proliant ml150 G2 to run a raid 5 config of windows 2003 srv.  When I got to the raid configuration utility on bootup and deleted the current raid and tried to...
Zones: MS Server, Drives / Storage, Storage ...Date Answered: 03/06/2007 Grade: A Views: 56