Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 1298(0.001 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

4.0
I am replacing a Citrix Router with a linux router. On the citrix, I have the following nat statements: ip subnet-zero ip nat inside source list 1 interface Dialer1 overload ip nat inside sour...
Zones: LinuxDate Answered: 11/25/2001 Views: 0
Any X xperts out there? (pun intended), attempting a static nat translation through a router (or fw) with an X client on the private IP side. Because the private NAT address is unreachable by the...
Zones: Unix NetworkingDate Answered: 06/11/2004 Views: 0
hi all,    i have to implement a Network Address Translator(NAT) for the linux platform in C. To do this, i have to be able to create my own packets as well as modify received packets before res...
Zones: CDate Answered: 10/07/2003 Views: 0
Hello, I would like to set up a client VPN using SecureClient, and Firewall-1 (NG), however, the real IP of the firewall needs to be NATed behind a public address. Is that going to present ...
Zones: Software Firewalls, Ch...Date Answered: 02/12/2004 Views: 0
I'm trying to setup an old box with linux to experiment doing some of the task I normaly do with a Windows machine. Today I tried to setup a REDHAT 8.0 Machine With 2 NIC's in order to share an ...
Zones: Linux NetDate Answered: 08/05/2003 Views: 0
Is there a way to use a public IP behind a NAT interface, the NAT interface being private? If so what would I need? Access-lists, policy routing?
Zones: RoutersDate Answered: 02/26/2003 Views: 0
I want to establish a direct connection between two clients that have their ip's translated by NAT, for instance: client A intranet ip is 150.1.1.1 on port 1000          the NAT translates it to...
Zones: Networking, Hardware Firewalls, DNSDate Answered: 02/05/2003 Views: 0
Ok, here it is.. very simple perhaps but i'm completely lost: I have four pc's. one old pentium 75/8MB, one PIII 500/256MB, one P4 1200/256MB and finally one P4 2800/1GB. the PIII has had it'...
Zones: Networking, Ubuntu, ...Date Answered: 06/12/2003 Views: 0
Hi Everyone, I'm faced with the task of setting up a network connected to an ADSL connection with 5 live ip addresses, and the rest of the network behind a NAT. My goal is to have one area of th...
Zones: RoutersDate Answered: 07/03/2003 Views: 0
Hello, For years I've been programming business apps, not hacking.  I can get around a NT but am not super learned on all the network internals. I'm working at a company where the boss thinks...
Zones: Windows Network SecurityDate Answered: 02/11/2004 Views: 0