Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 42(0 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

7.4
I wasn't really sure where to post this, but this was as close a topic as I could find. I'm trying to find out if there is a way to either get the current amdin password in netset or have it set to...
Zones: RoutersDate Answered: 06/25/2004 Views: 9
Hi i'm trying to configure voip using 3 com NBX it works on local lan but when connecting to remote office on softphones i receive tone but no voice, on NBX no signal I just looked and found i mis...
Zones: Networking, Hardware Firewalls, Enterprise Fi...Date Answered: 06/08/2005 Views: 15
Well here we go.  I know nothing about dial plans, i do my best but i do not know how to change the number to dial out.  Maybe one of you guys have dealt with thsi type of system and would know how...
Zones: VoIPDate Answered: 05/09/2006 Views: 9
I am trying to setup E1 PRI on my 3COM NBX SS3 running on firmware R4_3_17. Can anybody help me in setting it up? Details: PRI in terminated at remote location CISCO routers are used as PRI ga...
Zones: VoIPDate Answered: 01/13/2007 Views: 0
I'm currently using a 3Com NBX 25.  We have outgrew the system and have even had hardware failures lately. I'm trying to find a decent replacement that isn't too difficult to install and configure....
Zones: VoIPDate Answered: 04/10/2007 Views: 4
Does anyone know of an alternative to the 3Com Call Reporting Software - something that will work with an NBX ?
Zones: IP PBXDate Answered: 12/05/2008 Views: 0
Dear Experts; I need your help to configure my NBX100 system to disconnect the call after certain time Ex. 10Min, because i find out that there are many users make a long calls. I'm facing an...
Zones: VoIPDate Answered: 08/14/2005 Views: 0
I have recently setup a 3COM NBX V3000 in our office which also includes the PCXSET SOftphone. While on the Local LAN the softphone works fine on the users PC through the NBX V3000. This is wha...
Zones: VoIPDate Answered: 01/10/2006 Views: 0
My company is planning on selling a number of 3com NBX systems, so we are in the process of setting up a demo system for our internal use and to use for sales purposes. The unit itself is in a data...
Zones: VoIPDate Answered: 01/12/2006 Views: 5
Over the last few days when a voice message is left instead of receiving the wav file my users receive the following message: Unable to provide attachment. Probably the NBX subscribers mailbox was...
Zones: VoIPDate Answered: 02/21/2006 Views: 0