Advertisement

1 - 10 of 22 containing alltags:("on a network and firewalled") (0.002 seconds)
I have a webserver and a firewall. Sometimes I can see a large amount of ip fragment packets going to a game server (not allways the same) about 400gb in one night. Can I block this? Can it be a sc...
Zones: Transport, Networking, So...Date Answered: 02/07/2008 Grade: B Views: 18
Hi everyone, I have been getting tons of connection attempts to TCP port 5150 on my firewall.  The connection attempts are coming from a wide variety of IPs.  Does anyone know what services run...
Zones: TCP/IP, Network analysis SoftwareDate Answered: 01/28/2008 Grade: B Views: 4
SUMMARY I have three Linux boxes that are unknown to my corporate IT department. Recently, they simultaneously stopped communicating with the outside Internet world, though they had worked fine ...
Zones: Software Firewalls, Ent...Date Answered: 09/10/2008 Grade: A Views: 0
I have a sonicwall pro 200 firewall. I want to be able to set up an exchange server in my DMZ that will bind with Active Directory. What rules do I need to create in the firewall to allow that unit...
Zones: Network Management, Net SecurityDate Answered: 09/30/2008 Grade: B Views: 0
Hello, First-time asker here, trying to find some info and this seemed like the right place to go. I have a PC (not a server) here at my IT job that I want to remove access to networking appl...
Zones: Networking, Microsoft Network, Net ...Date Answered: 10/13/2008 Grade: A Views: 5
I have the following situation: - I have a private network connected through a Linux machine where all machines in this network have IPs 10.1.1.XXX where XXX is their specific machine - The m...
Zones: Unix NetworkingDate Answered: 08/18/2003 Grade: B Views: 0
We are deploying an ASA5520 Cisco Firewall and we plan to use 2 ISP broadband connections for redundancy and traffic management. The goal is to route outgoing HTTP/HTTPS/FTP traffic using the firs...
Zones: Hardware Firewalls, RoutersDate Answered: 04/26/2008 Grade: A Views: 12
Hello Experts,     I am currently working on configuring a network diagram that will be ISP1/ISP2--->2621---->PIX 506E---->2912.  I want to run NAT and terminate vpn clients on the pix.  I have ...
Zones: RoutersDate Answered: 04/24/2006 Grade: A Views: 0
Hello, I am trying to route traffic from another LAN on a x.x.3.0/24 subnet to a LAN on x.x.1.0/24 subnet. I am doing this via static routes on HP procurves.   Procurve LAN 1 is setup as x.x...
Zones: Hardware Firewalls, Routers, Network ...Date Answered: 02/27/2008 Grade: A Views: 35
I'm working in Excel and have a on-going project I'm tracking. I was trying to add a few more cell references today and got the error message. " Formula is too long". I'm attaching the spreadsheet ...
Zones: MS ExcelDate Answered: 03/12/2008 Grade: A Views: 0