I have just installed Linux and it currently has no sound... i downloaded a driver from packardbell but it is a exe which runs under DOS can i execute this in linux? If not what do i have to do to ...
http://www.experts-exchange.com/OS/Linux/Q_21106641.html
I am working on a Packard Bell Legend 125 computer. I cannot get into the bios setup to change the hard drive information. According the the Packard Bell website, you use F1, F2, or DEL to get in. ...
http://www.experts-exchange.com/Hardware/Misc/Q_10299587.html
Zones:
HardwareDate Answered: 02/23/2000 Grade: B Views: 0
I am trying to revive an old Packard Bell PB4240 Computer. The specs are: Windows 95 (version 4.00.950), 75mhz Pentium, 630mb Hard drive, 8mb RAM, 14.4 Modem, 4x CD-ROM. Phoenix BIOS. This is a fri...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Win95_3x/95/Q_10313...
Zones:
Windows 95Date Answered: 03/26/2000 Grade: A Views: 8
I have now had two HP 4200C scanners and very little success in scanning. The first scanner died after 90 days. I then purchased a refurbished scanner from HP, which did not work on any of the th...
http://www.experts-exchange.com/Hardware/Peripherals/Scanners/HP/Q_10432078.html
Zones:
HP ScannersDate Answered: 06/22/2000 Grade: B Views: 0
I have a Packard Bell Legend 132 CDT Supreme. The A:\ drive went bad. I disconnected the drive and connected it to a new drive without putting it in the machine. The machine booted up fine so I...
http://www.experts-exchange.com/Hardware/Misc/Q_11358897.html
Zones:
HardwareDate Answered: 10/05/2000 Grade: B Views: 0
I have a PB T30 (I believe) and have just purchased a new 30Gb drive. This was meant to replace the 2Gb drive that the PC came with.
I tried booting from the Floppy Disk and 1st CD that came wi...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/98/Q_20113325.html
Zones:
Windows 98Date Answered: 05/08/2001 Grade: B Views: 0
I have a Packard Bell system to which I have just added a 30Gb disk drive as the slave to a 2Gb disk on the primary IDE.
When I look in the device manager it has a yellow exclamation mark agains...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/98/Q_20114615.html
Zones:
Windows 98Date Answered: 05/08/2001 Grade: A Views: 0
Does anyone know what type of RAM Packard Bell Multimedia 720 uses? I've run into a lot of dead-ends searching for info on PBs.
http://www.experts-exchange.com/Hardware/Misc/Q_20330907.html
Zones:
HardwareDate Answered: 08/02/2002 Grade: A Views: 0
hey huys, i have a problem.
i have a old Packcard Bell(3yrs) n formated yesterday, n now the adapter is standart graphics card(vga) for my PB pnp 5480, i cant have more color, i dont find any goo...
http://www.experts-exchange.com/Hardware/New_Users/Q_20412376.html
Zones:
New UsersDate Answered: 08/22/2003 Grade: A Views: 0
Hi there, I have an old Club 75 Packard Bell,
Part Number : P160103801
The PSU has failed, it is a
Fortron/Source FSP145-61GN 145W
I am seeking advice on what PSU should I replace the curre...
http://www.experts-exchange.com/Hardware/Misc/Q_21771953.html
Zones:
HardwareDate Answered: 04/03/2006 Grade: A Views: 0
