Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 931(0.022 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

5.2
I can't seem to access the other P.C in my network, even though i have enabled sharing on both drives. However, the only thing i can see on my network neighbour hood is only my P.C, not the other. ...
Zones: Windows 9x NetworkingDate Answered: 01/29/1998 Views: 0
HELP!! When i booted my system this am, it seemed to boot normally but when completed boot sequence and started windows, the screen was BLACK. During boot, it displayed everything normally. It wou...
Zones: Windows 95Date Answered: 02/28/1998 Views: 0
* Protected mode under DOS 6.22 I made a special board for pci.. It's for image grab. I want to read when job is done(image transferring is end)   with pci interrupt. Please, set forth the prep...
Zones: CDate Answered: 02/04/1999 Views: 0
A friend has an isa modem but no isa slots. Given the price of modems these days, is there an economical isa-pci adapter available. How about installing an isa slot?
Zones: Hardware, NIC Cards / AdaptersDate Answered: 03/01/1999 Views: 0
ok,i just bought a new computer 3 weeka ago..i can connect perfectly on the internet..BUT...as soon as a "sound" plays it freezes and disconnects me..i think theres a conflict with my modem and sou...
Zones: ModemsDate Answered: 04/23/1999 Views: 0
My Windows 95 (with USB support) does not recognize my Epson Stylus 740 USB printer, even after installing the driverset. The PCI USB controller reports "UNKNOWN DEVICE". The printer driver continu...
Zones: Win95 SetupDate Answered: 09/17/1999 Views: 0
I have an adaptec aha-29160 scsi adapter, which is designed for pci64 but is also supposed to work on pci32. My question is this, What is the performance degredation that I should expect?, will I ...
Zones: Hardware, MotherboardsDate Answered: 08/23/2000 Views: 0
I am wondering if there is any loss of performance using a PCI ATA-100 controller card vs. motherboard enabled ATA-100 ? I am unsure of the pci bus limits.  Thanks
Zones: HardwareDate Answered: 01/13/2001 Views: 0
One or more times a day my windows 2000 desktop goes into a state of half freeze. I can select desktop icons and look through the start menu but clicking or double clicking on anything will not ru...
Zones: Windows 2000Date Answered: 03/31/2003 Views: 0
Hi, I have been answering questions in programming (mainly C++) areas, now it is my turn to ask :-) I have an old Compaq PW 1500. I needed to upgrade video card from 2Mb Matrox Millenium. Unfor...
Zones: Hardware, Video CardsDate Answered: 06/22/2001 Views: 0