I was wondering if any of you have come across an advanced data modeling book that you would recommend?
I don't want something that just talks about the basics like cardinality and LDMs vs. PDMs...
http://www.experts-exchange.com/Database/Oracle/Q_20087286.html
Zones:
OracleDate Answered: 03/06/2001 Grade: A Views: 0
Hi,
I have a pix 506 and i need to open port 3167. I don't know much about firewalls but I can get to the configuration webpage for the firewall. Can anyone tell me what i have to do to open up th...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21032843.html
Am trying to allow users on the Internet access to a Web based mail server using HTTP & HTTPS.
So far have been unable to access the internal server that is hosting the Web site.
Have one extern...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21212020.html
I bought a 506e from ebay. I reset the password using the instructions on this site. Everything went smoothly except PDM is not working.
I can access the router via hyperterminal so I ran the ff c...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21586318.html
Scenario:
My intranet has 3 subnets: 192.168.41.0 /24 - 192.168.43.0 /24.
They are connected by leased lines - cisco 2500 at each site.
A PIX 515 is placed at the 192.168.42.0 /24 network for VP...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21606216.html
Some entries were made on my firewall from a previous user. I want to remove the address that have been entered.
how do I go about doing this?
Below is a list of the entries.
----------
ac...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21831611.html
I am having a ton of trouble establishing a VPN connection between my HQ and branch office.
HQ: 2811 Cisco, mainly configure using SDM
Branch1: Cisco PIX 515e using PDM
I am not CISCO cert...
http://www.experts-exchange.com/Networking/Misc/Q_21947377.html
In PDM, when doing a command 17, you can change the settings, but it is only for that time through. Is there a way to change the defaults settings so that you don't have to do a command 17 every t...
http://www.experts-exchange.com/Programming/System/AS_-_400/Q_20127001.html
I'm pretty new to PML so I have a learning curve ahead of me.
I am building a simple form that has a list and a view, along with two buttons. The list is populated from a directore, the view ...
http://www.experts-exchange.com/Programming/Misc/Q_20175766.html
Zones:
ProgrammingDate Answered: 12/03/2002 Grade: B Views: 21
If someone have PIX PDM 2.1 or 2.0 plz give it to me as I am unable to find it on cisco site
http://www.experts-exchange.com/Security/Software_Firewalls/Q_20564941.html
